/csgo-gsi-arduino-lcd

CS:GO GSI on Python and Arduino LCD shield

Primary LanguagePythonMIT LicenseMIT

CsgoGSI on Python and Arduino LCD shield

A Counter-Strike: Global Offensive Game State Integration project based on python with screen on arduino

This project is using the game state integration from csgo. The informations are received by the program made in python and are shown on an arduino LCD shield.

Features

  • Bomb timer (40s)
  • Health + kevlar bar
  • Kills and headshots counter
  • Money informations on buy time

Table of Contents

Requirements

  • Arduino (tested on UNO rev3)
  • Arduino LCD KeyPad Shield (tested on v1.1)
  • USB Ports
  • Python 3.8+

Check the pins in Arduino

Verify if the pin are the good ones on the arduino program for the LCD shield. (line 10)

LiquidCrystal(rs, enable, d4, d5, d6, d7)

For LCD shield v1.0. Comment line 17-22 and uncomment line 24-30 in the serialsend.ino. Like this:

  // For V1.1 us this threshold
  /*
  if (adc_key_in < 50)   return btnRIGHT;
  if (adc_key_in < 250)  return btnUP;
  if (adc_key_in < 450)  return btnDOWN;
  if (adc_key_in < 650)  return btnLEFT;
  if (adc_key_in < 850)  return btnSELECT;
  */
  // For V1.0 comment the other threshold and use the one below:
  if (adc_key_in < 50)   return btnRIGHT;
  if (adc_key_in < 195)  return btnUP;
  if (adc_key_in < 380)  return btnDOWN;
  if (adc_key_in < 555)  return btnLEFT;
  if (adc_key_in < 790)  return btnSELECT;

Usage

  1. Clone/download this repository :

    git clone git@github.com:Darkness4/csgo-gsi-arduino-lcd.git

  2. Move gamestate_integration_arduinotrack.cfg in Counter-Strike Global Offensive\csgo\cfg.

  3. Mount the LCD shield on the arduino and push the serialsend.ino in the arduino (remember the COM port).

  4. Install the dependencies:

    • Using pip :

      pip install -r requirements.txt

    • Using pipenv :

      pipenv install
pipenv shell

  5. Launch CS:GO

  6. Run the python program (choose one and make sure you have added /Python/Scripts to Path)

    python -m csgo_gsi_arduino_lcd

  7. Choose the right COM

  8. Play some CSGO and enjoy!