Dual display

[marabesi]

I have a dual 7segment display which I'd like to display decimal numbers using the SevSeg lib.

However I couldn't find the pins I should use. I did a few tests and I could power on only one side of the digits.

Here is the display I am using

Is there a correct map to use ?

Thank you

[DeanIsMe]

Hi, From the picture that you sent, I recommend to connect A1 to A2, B1 to B2, etc. These 8 nodes you'll need to also connect to the arduino and configure as segment pins. Common1 and common2 should your digit pins, so connect these to the arduino. Regards, Dean

…

________________________________ From: Matheus Marabesi <notifications@github.com> Sent: Monday, August 13, 2018 5:25:29 PM To: DeanIsMe/SevSeg Cc: Subscribed Subject: [DeanIsMe/SevSeg] Dual display (#40) I have a dual 7segment display which I'd like to display decimal numbers using the SevSeg lib. However I couldn't find the pins I should use. I did a few tests and I could power on only one side of the digits. Here is the display I am using [captura de pantalla 2018-08-13 a la s 12 24 44]<https://user-images.githubusercontent.com/2129872/44041329-e8fcb808-9ef3-11e8-8dbf-855aecf74c00.png> Is there a correct map to use ? Thank you — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#40>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AEG7QK60eKm_ELg5GTwEiBBYYY_Roqbhks5uQZppgaJpZM4V6uFZ>.