/esphome-waveshare-e-paper-dashboard

Dashboard for office co2 and some plant swag

ESPHome Dashboard

Dashboard for office Co2 and some plant swag

Inspired by: https://github.com/maxmacstn/HA-ePaper-Display
Thanks for the nice repository!

Hardware:

  1. Waveshare 4.2" ePaper module
  2. ESP32 NODEMCU

Case

I did not find anything fitting yet, so currently attempting my own design.

Information

With the dashboard sitting on my desk it most prominently displays Co2 ppm from a Netatmo weatherstation to remind me to open the windows.
It also shows temperature and humidity from the same station. In addition stats from a VegTrug Soil Tester is shown on the bottom half.

Wiring:

Waveshare ESP32 Pin
BUSY GPIO27
RST GPIO33
DC GPIO25
CS GPIO26
CLK GPIO18
MOSI GPIO23
GND GND
3.3v 3.3v

How to use?

  1. Install ESPhome on your computer or Home Assistant Add-on
  2. Get the yaml file and download the fonts (Roboto and materialdesignicons-webfont.ttf) to your ESPhome folder.
  3. Edit your Wi-Fi SSID/Password, sensors entity ID, etc. as your own preference.
  4. Connect hardwares together.
  5. Flash the firmware.
  6. Go to Home Assistant, it should automatically discovered your espHome display. If not, add it manually using IP address via ESPhome integration.
  7. Enjoy!