A demonstration to display something in Sharp Memory LCD
fit to : models :LS027B7DH01
输出图片到夏普memory LCD的程序，支持型号：LS027B7DH01
according to the official document, we need two 0.1uf ceramic capacitor, one 1uf ceramic capacitor.
按照官方文档，需要两个0.1uf电容，一个1uf电容
schematic:
connect1:
connect2:
Schematic:
connect:
although the official document say the data SCLK should not over 2M hz,
i found it could handle 10M hz
尽管官方文档说时钟频率不应该超过2M hz，但我测试发现10M hz也是能轻松处理
schematic:
connect:
stm 32 result
arduino result
source:
black and white:
