This integration exposes the information and functions made available by V2C trydan directly via http interface in Home Assistant.
This integration supports network connection to V2C trydan directly, so that take note of the V2C trydan static IP address previously.
For a later configuration, you need to know the electrical consumption data of your car expressed in Kwh per 100 km
- Add this repository in HACS ( https://github.com/Rain1971/V2C_trydant.git )
- Add integration and put there your device IP
- Go to the integration on settings->devices and set Kwh x 100Km of your car by pressing configure
The following entities are created:
| Name | Type | R/W | Units | Description |
|---|---|---|---|---|
| v2c_trydan_sensor_chargeenergy | Sensor | R | N kWh | Current charging session energy in kWh. |
| v2c_trydan_sensor_chargekm | Sensor | R/W | N km | Current charging session energy in Km. |
| v2c_trydan_sensor_chargepower | Sensor | R | N W | Current charging power in Watts. |
| v2c_trydan_sensor_chargestate | Sensor | R | S values |
Charge Point. States: Manguera no conectada, Manguera conectada (NO CARGA),Manguera conectada (CARGANDO) |
| v2c_trydan_sensor_chargetime | Sensor | R | N s | Current charging session time. |
| v2c_trydan_sensor_contractedpower | Sensor | R | N W | House Contracted Power in Watts. Default -1 |
| vc2_trydan_sensor_dynamic | Sensor | R | N values |
Dynamic Intensity Modulation state: 0-Disabled, 1-Enabled |
| vc2_trydan_sensor_dynamicpowermode | Sensor | R | N values |
Dynamic Mode: 0 Timed Power enabled; 1-Timed Power Disabled, 2-Timed Power Disabled and Exclusive Mode setted, 3-Timed Power Disabled and Min Power Mode setted, 4-Timed Power Disabled and Grid+FV mode setted, 5-Timed Power Disabled and Stop Mode setted |
| vc2_trydan_sensor_fvpower | Sensor | R | N W | Photovoltaic power generation in Watts. |
| vc2_trydan_sensor_housepower | Sensor | R | N W | House power consumption in Watts. |
| v2c_trydan_sensor_intensity | Sensor | R/W | N A | Intensity offered by Charge Point in Amps, if Dynamic Charge is disabled. |
| v2c_trydan_sensor_locked | Sensor | R | N values |
Disabling state of Charge Point: 0-Enabled, 1-Disabled |
| v2c_trydan_sensor_maxintensity | Sensor | R/W | N A | Intensity offered maximun limit in Amps, if Dynamic Charge is enabled. (max default 32A) |
| v2c_trydan_sensor_minintensity | Sensor | R/W | N A | Intensity offered minimun limit in Amps, if Dynamic Charge is enabled. (max default 6A) |
| v2c_trydan_sensor_paused | Sensor | R | N values |
Pause state of current charging session: 0-Enabled, 1-Disabled |
| v2c_trydan_sensor_pausedynamic | Sensor | R | N values |
Dynamic Control Modulation Pause State: 0-Modulating, 1-No Modulating |
| v2c_trydan_sensor_slaveerror | Sensor | R | N values |
Slave communication state: 0-No error, 1-error message, 2-Communication error |
| v2c_trydan_sensor_timer | Sensor | R | N values |
Charge Point Timer state: 1-Timer ON, 0-Timer OFF |
| vc2_trydan_switch_dynamic | Switch | R/W | on off |
Toggle to dynamic charge. Default off |
| v2c_trydan_switch_paused | Switch | R/W | on off |
Toggle to pause charge. Default off |
| v2c_trydan_switch_locked | Switch | R/W | on off |
Toggle to block the charger. Default off |
- You can also use a automation to check when device has changed the Km set:
alias: CARGA COCHE COMPLETA
description: CARGA COMPLETA
trigger:
- platform: event
event_type: v2c_trydan.charging_complete
action:
- service: notify.notify
data:
message: La carga del vehículo ha alcanzado el límite de kilómetros.
- service: notify.pushover
data:
message: KM del coche CARGADOS
title: CARGADOR!
data:
priority: 1
enabled: true
mode: single
- Use example.yaml as lovelace example or copy this code:
type: vertical-stack
cards:
- type: markdown
content: <CENTER><H1>CARGADOR COCHE</H1></CENTER>
- type: horizontal-stack
cards:
- type: gauge
entity: sensor.v2c_trydan_sensor_fvpower
severity:
green: 0
yellow: 8000
red: 9500
needle: true
min: 0
max: 10000
name: Producción FV
- type: gauge
entity: sensor.v2c_trydan_sensor_housepower
name: Consumo hogar
severity:
green: -10000
yellow: 0
red: 0
needle: true
min: -10000
max: 10000
- type: gauge
entity: sensor.v2c_trydan_sensor_chargepower
name: Cargando en el coche
needle: true
min: 0
max: 8000
severity:
green: 0
yellow: 7200
red: 7700
- type: entities
entities:
- entity: sensor.v2c_trydan_sensor_chargestate
name: Estado
secondary_info: none
- entity: switch.v2c_trydan_switch_dynamic
name: Control dinámico
secondary_info: last-changed
- entity: switch.v2c_trydan_switch_paused
name: En pausa
icon: mdi:play
secondary_info: last-changed
- entity: switch.v2c_trydan_switch_locked
name: Bloquedado
icon: mdi:play
secondary_info: last-changed
- entity: sensor.v2c_trydan_sensor_intensity
name: Intensidad de carga
secondary_info: last-changed
- entity: sensor.v2c_trydan_sensor_minintensity
name: Mínimo dinámica
secondary_info: last-changed
- entity: sensor.v2c_trydan_sensor_maxintensity
name: Máximo dinámica
secondary_info: last-changed
- entity: sensor.v2c_trydan_sensor_chargeenergy
name: Energía cargada
secondary_info: none
- entity: sensor.v2c_trydan_sensor_chargekm
name: Km Cargados
secondary_info: none
- entity: sensor.v2c_trydan_sensor_chargetime
name: Tiempo de carga
- entity: number.v2c_km_to_charge
name: Km a Cargar
secondary_info: last-changed
icon: mdi:car-arrow-right
- type: conditional
conditions:
- entity: switch.v2c_trydan_switch_dynamic
state: 'on'
card:
type: entities
entities:
- entity: number.v2c_min_intensity
name: Ajusta Imin dinámica
icon: mdi:current-ac
- entity: number.v2c_max_intensity
name: Ajusta Imax dinámica
icon: mdi:current-ac
- type: conditional
conditions:
- entity: switch.v2c_trydan_switch_dynamic
state: 'off'
card:
type: entities
entities:
- entity: number.v2c_intensity
name: Ajusta ICarga
icon: mdi:current-ac