DiamondLightSource/pmac

Issues

• Issue with BOOST_MESSAGE in pmacApp/unitTest

  #87 opened 4 years ago by zioven
  4

• Invert state of :PLCDISBITS00 and :PLCDISBITS01 for PowerPMAC to match TurboPMAC Readback

  #127 opened 7 months ago by JamesOHeaDLS
  0

• PPMAC - Invalid lookahead definition when switching CS Groups

  #125 opened 7 months ago by LeandroMartinsdS
  0

• PPMAC - Disable limits not supported

  #122 opened 10 months ago by LeandroMartinsdS
  0

• pmacAsynIPPortSrc does not build on windows-x64

  #119 opened a year ago by MarkRivers
  0

• Intermittent connection dropout, even when all motor channels are completely idle

  #110 opened a year ago by jwlodek
  10

• PPMAC - global Time in trajectory_scan_definitions_ppmac.pmh breaks Sys.Time

  #117 opened a year ago by huw-dls
  0

• Global status bits doesn't support PowerPMAC

  #113 opened a year ago by LeandroMartinsdS
  0

• StopAll and KillAll forces reconnection for Power PMAC

  #109 opened a year ago by LeandroMartinsdS
  0

• Owner for Debug messages for pmacHardwarePower is wrong

  #97 opened a year ago by AugustoHorita
  1

• libssh2 has been deprecated in RHEL 7, removed in RHEL 8.

  #101 opened 2 years ago by ajgdls
  0

• Compile error on vxWorks

  #94 opened 3 years ago by MarkRivers
  7

• String PV

  #93 opened 3 years ago by georgekontogiorgos
  0

• Trajectory scan problems

  #88 opened 4 years ago by georgekontogiorgos
  5

• EPICS way for "Closed Loop"

  #84 opened 4 years ago by georgekontogiorgos
  17

• homing from EPICS

  #83 opened 4 years ago by georgekontogiorgos
  7

• dkill from EPICS

  #82 opened 4 years ago by georgekontogiorgos
  6

• EPICS "gantry follower" mode

  #86 opened 4 years ago by rafaelfalcaro
  0

• Feed rate error on kinematic

  #85 opened 4 years ago by rleoni
  4

• Crash with "floating point exception"

  #81 opened 5 years ago by tyjisinap
  3

• Global variables as PVs

  #80 opened 5 years ago by georgekontogiorgos
  2

• PMAC PCI

  #78 opened 5 years ago by dallanporter
  2

• Problems with PowerPMAC

  #75 opened 6 years ago by gabrielfedel
  1

• Compile error on CentOS7

  #70 opened 6 years ago by waynelewis
  2

• How to use this IOC with PowerPMAC

  #69 opened 6 years ago by gabrielfedel
  6