/WifiCar_NodeMcU

Primary LanguageC++

Codes for WifiCar

NodeMCU Boards should be added in your Arduino IDE.

You can check this guide here: https://circuits4you.com/2018/06/21/add-nodemcu-esp8266-to-arduino-ide/

WifiCar

For accessing and using the car via a local network, just change SSID and Passowrd. Connect using the App.

WifiCar_EasyDDNS

For accessing and using the car via a local network as well as from outside of your network (WAN), change SSID and Passowrd.

Requirements:

  • NoIP Account (for DDNS Setup)
  • Open Port on your Router
  • Internet Connection

Setup DDNS:

  1. Add the EasyDDNS Library to Arduino IDE.
  2. Enter your NoIP Hostame, Username and Password in the code
  3. Open a port on your Router, prefered 8080

Note: If you open any other port than 8080, also change it in the code!

Connect using the App, using the IP Address or rather the Hostname from NoIP.

For More information on EasyDDNS Library, visit:

https://github.com/ayushsharma82/EasyDDNS