Dloranger
I am a senior electrical engineer with experience focused on PCB design, and prototyping.
ICS-CTRL.COMSeattle Area
Pinned Repositories
APRS_Script
DL-openrepeater
This is where web application files live for the OpenRepeater Project. The OpenRepeater web application is a front end interface to the svxlink core system and builds the appropriate configuration files needed for operation.
scripts
Misc scripts live here like system build scripts. This is a Work-In-Progress...
svxlink
Advanced repeater system software with EchoLink support for Linux including a GUI, Qtel - the Qt EchoLink client
Svxlink-Custom
svxlink custom files for non gui install
svxlink-install-scripts
svxlink install scripts
Svxlink-Menu
Svxlink Bash configure menu
svxlink-scripts
moving old scripts
svxlink-sounds-en_US-laura-v2
svxlink sounds
svxlinkVoiceControl
Dloranger's Repositories
Dloranger/svxlink-sounds-en_US-laura-v2
svxlink sounds
Dloranger/svxlinkVoiceControl
Dloranger/APRS_Script
Dloranger/DL-openrepeater
This is where web application files live for the OpenRepeater Project. The OpenRepeater web application is a front end interface to the svxlink core system and builds the appropriate configuration files needed for operation.
Dloranger/scripts
Misc scripts live here like system build scripts. This is a Work-In-Progress...
Dloranger/svxlink
Advanced repeater system software with EchoLink support for Linux including a GUI, Qtel - the Qt EchoLink client
Dloranger/SvxLink-Dashboard
Dloranger/svxlink_digole_2inch_lcd
Dloranger/SVXLINK_LANGUAGE_PACKS
Dloranger/AudioInjector.Octo.balanced
Dloranger/Diamond-Printer-firmware
Dloranger/dtmfdecoder
control software for hardware DTMF decoder module for the ICS Control PiRepeater products
Dloranger/Eagle_libr
Dloranger/Eagle_Up_Models
3d sketchup models for use in Eagle UP utility
Dloranger/esp32-arduino-matter
Matter IoT protocol library for ESP32 working on Arduino framework
Dloranger/ignition_delay
Dloranger/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Dloranger/MODULE_Metar_Info
The metar information module is used to get METAR (weather) information from ICAO locations, usually airports, and announces them over the air. You can request a METAR from an airport of your interest.
Dloranger/Module_RaceTracker
Dloranger/Module_RigCtl
DTMF to CI-V commands for Icom IC-7100
Dloranger/MODULE_template
A template for users of ORP to reference when creating a new custom module
Dloranger/open60
Android Bluetooth client for the Mini60 antenna analyzer
Dloranger/orp-sounds
Sounds required by OpenRepeater for SVXLink core and modules.
Dloranger/PI-Repeater-4x_config_files
Dloranger/pnp-feeder
An automated feeder for pick and place machines.
Dloranger/RPi-GPS-PPS-StratumOne
setup a Raspberry Pi as a Stratum One time server (GPS with PPS)
Dloranger/seeed-voicecard
2 Mic Hat, 4 Mic Array, 6-Mic Circular Array Kit, and 4-Mic Linear Array Kit for Raspberry Pi
Dloranger/StereoAudioBreakouts
Dloranger/svxlink-install-script
Svxlink install script
Dloranger/svxlink-sounds-en_US-heather
English language pack for SvxLink Server using voice Heather from Acapela Box