DoESLiverpool/somebody-should
A place to document practices on the wiki and collect issues/suggestions/to-do items for the physical space at DoES Liverpool
Issues
- 0
Bandsaw blade in need of replacement
#1888 opened - 8
- 1
Doorbot 2 slow to react to fobs
#1886 opened - 2
- 10
Should DoES get a modern digital oscilloscope?
#1884 opened - 4
Laser Alignment for Gerald
#1883 opened - 1
Belts slipping on Prints Adam
#1882 opened - 2
Rear fire door is difficult to close
#1881 opened - 0
- 2
Buy more scalpel blades
#1879 opened - 3
Tony not cutting, Gerard creating flames
#1878 opened - 0
Replace ESP32 A in the Geometric Lights
#1877 opened - 4
Oil heater in annex tripped the breakers
#1876 opened - 8
Sheila Laser cutter stopped working
#1875 opened - 5
- 2
St Margaret heat press not heating up
#1873 opened - 1
Eco friendly Coffee
#1872 opened - 2
Ackers bell
#1871 opened - 18
Some replacement furniture
#1870 opened - 15
Fire in Gerald
#1869 opened - 5
Intermittent Internet access issues
#1868 opened - 1
Default device missing on Tony
#1867 opened - 1
- 0
Queen Victoria's paper roll has run out
#1865 opened - 4
Thermaltronics pointy soldering tip not working
#1864 opened - 2
Lightburn registration
#1863 opened - 1
Singer sewing machine - no power
#1862 opened - 0
- 1
- 5
Aircon fault in the main room and room 29
#1859 opened - 4
Replace bobbin case on Fred embroidery machine
#1858 opened - 1
Dispose of paint tins
#1857 opened - 1
Accessible Toilet Fan Not Working
#1856 opened - 2
Add double-sided tape to the weights at the bottom of the blinds in Room 29 and the Event space
#1855 opened - 0
Tony out of square when engraving
#1854 opened - 2
Sheila
#1853 opened - 2
- 2
Software for new (old) scanner
#1851 opened - 3
Sewing Machine Feet
#1850 opened - 6
Move into our temporary space
#1849 opened - 1
- 3
- 3
Buy cleaning materials for the laser cutters
#1846 opened - 5
Improving extraction in the laser room
#1845 opened - 3
Thread tension on Fred
#1844 opened - 2
Gerald firing but not cutting fabric
#1843 opened - 1
- 0
Ecodress Maintenance
#1841 opened - 1
CR-6 Max not extruding
#1840 opened - 1
Coffee bell needs a new power supply
#1839 opened