DoESLiverpool/somebody-should

Issues

• Hack the Space 14th of December

  #1966 opened a month ago by Robotorium
  0

• Get replacement bearings for the drill press in the CNC room

  #1927 opened 5 months ago by helicalbytes
  1

• Please add me to the Github organisation!

  #1965 opened a month ago by NickB1982
  1

• Heater in Fibre Arts Room - Tripped Fuse Box

  #1964 opened a month ago by NickB1982
  1

• Get a new C6 to C13 adapter for the PAT tester

  #1963 opened a month ago by amcewen
  1

• Gerald's bed is very wobbly

  #1960 opened a month ago by JackiePease
  1

• Cable damaged on an extension lead to the east bank of desks in the main room

  #1962 opened 2 months ago by amcewen
  1

• Clean the blue chairs in the Event Space

  #1951 opened 3 months ago by JackiePease
  1

• Main space doorbot not working

  #1957 opened 2 months ago by JackiePease
  1

• Write an article clarifying what to expect from Does and vice versa

  #1961 opened 2 months ago by Robotorium
  0

• Gerald's bed needs cleaning

  #1959 opened 2 months ago by JackiePease
  1

• Small holes in floor by cable shelves

  #1958 opened 2 months ago by JackiePease
  0

• The HVAC in the Fibre Arts room isn't working

  #1934 opened 2 months ago by JackiePease
  7

• No Internet on Tony's computer

  #1956 opened 2 months ago by amcewen
  0

• Drill press chuck jaws are stuck open

  #1954 opened 2 months ago by amcewen
  1

• Tony not cutting cleanly

  #1955 opened 2 months ago by JackiePease
  2

• Make a trough for cleaning sections of Tony's laser bed

  #1950 opened 3 months ago by JackiePease
  1

• Doorbell for the main space isn't working

  #1936 opened 2 months ago by JackiePease
  7

• Hand dryer in more accessible loo has lost the power to blow your hands off

  #1953 opened 2 months ago by Robotorium
  3

• Rearranging the CNC room

  #1949 opened 3 months ago by helicalbytes
  5

• Phaser 7100N Colour printer not working

  #1952 opened 2 months ago by Simon-Jones7
  4

• Gerald is out of alignment

  #1942 opened 4 months ago by amcewen
  11

• Doorbot 2 failed

  #1948 opened 3 months ago by johnmckerrell
  31

• Commission Ultimaker 2+ printer Eddie

  #1945 opened 3 months ago by JackiePease
  2

• Malfunctioning ceiling lights in the main room

  #1928 opened 3 months ago by JackiePease
  8

• Gerald out of order

  #1943 opened 4 months ago by DaveBenji
  9

• Gerald engraving is blurry

  #1938 opened 3 months ago by JackiePease
  2

• Alignment issues with Gerald

  #1939 opened 3 months ago by JackiePease
  1

• Evaluate sewing machine brought in by Jade

  #1947 opened 3 months ago by JackiePease
  0

• Please Add Me to the Organisation

  #1946 opened 3 months ago by geclypod
  1

• Fuse for main room tripped when I switched the lights on

  #1941 opened 4 months ago by JackiePease
  1

• 2024 pricing review and related tasks

  #1919 opened 6 months ago by johnmckerrell
  3

• Wand on the Thermaltronic soldering iron is temperamental

  #1944 opened 4 months ago by amcewen
  0

• Service embroidery machine Fred

  #1931 opened 4 months ago by JackiePease
  7

• Screws on latch on fire door came loose

  #1940 opened 4 months ago by tfwoodroofMCS
  0

• Look into buying a new spindle motor for the Kinetic CNC machine.

  #1921 opened 6 months ago by magman2112
  25

• Laser cutter head on Gerald moving to the left on start up, but not recognising limit switch

  #1935 opened 4 months ago by JackiePease
  1

• Buy grease for the 3D printers.

  #1937 opened 5 months ago by JackiePease
  2

• Look into replacing the brown desks used for the pen plotter and resin printers

  #1933 opened 5 months ago by JackiePease
  0

• Doorbell isn’t sounding

  #1932 opened 5 months ago by zarino
  3

• 2024 compare prices with "similar" spaces

  #1920 opened 6 months ago by johnmckerrell
  2

• HP LaserJet Pro M402dn complaining of a (phantom?) paper jam

  #1924 opened 5 months ago by zarino
  2

• Evaluate potential uses for "spare" 3d printers

  #1930 opened 5 months ago by JackiePease
  0

• Missing screw on laser cutter Gerald

  #1929 opened 5 months ago by JackiePease
  1

• Tony PC not working

  #1922 opened 5 months ago by JackiePease
  1

• Sublimation printer needs ink

  #1925 opened 5 months ago by Robotorium
  7

• Band saw needs new blade

  #1926 opened 5 months ago by magman2112
  1

• Reprint the top section of the DoES Tower

  #1923 opened 6 months ago by amcewen
  1

• Lens needs replacing on Tony

  #1917 opened 7 months ago by magman2112
  6

• Tool drawer bottoms collapsing.

  #1918 opened 7 months ago by magman2112
  0