Dash System Arduino Core
Introduction
This is an Arduino implementation for the System processor on the Hologram Dash. Build your own image using the Arduino IDE or build the included Hologram firmware.
Arduino Installation
- Find your local Arduino directory (e.g. macos
~/Documents/Arduino/
). - In the
hardware
directory, clone this repository. - Open the Arduino IDE (close/reopen if already running).
- Select the
Dash System
board from thesystem.hologram.io Dash and DashPro Boards
section of the board selection menu.
Building Firmware
- With the
Dash System
board selected, from the Examples menu, select an example sketch. - Click the Verify button to build.
Programming the User processor
- Use Hologram Arduino package version 0.10.4 or later.
- Open the user sketch to program.
- From the Programmer select
hologram.io USB loader
. - From the Firmware Updates menu, select
Custom Firmware
. - Click the Upload button in the Arduino IDE.
Programming the System processor
- From the Programmer select
system.hologram.io USB
. - Connect the Dash to your computer via USB.
- Press the Program button on the Dash.
- Click the Upload button in the Arduino IDE.
Support
Please feel free to reach out to us if you have any questions/concerns.