/WWAN_Check

Primary LanguageShell

A tool to validate WWAN or WLAN function with power transitions

How To Use

  • Run ./WWAN_Check.sh
  • Run cat Result.log to check if the initial result of cycle #0 is good
  • Select suspend(S3)/reboot/poweroff(S5) stress test to run
  • To stop the trace, turn off WWAN and select 'Clean' from the options

Test cases included

  • #1 - check if device driver is loaded properly in dmesg
  • #2 - check the presence of WWAN in IP command
  • #3 - check the presence of WWAN in Modem Manager
  • #4 - check cellular network connection state in Network Manager
  • #5 - check IP address in Network Manager
  • #6 - get signal quality from Modem Manager
  • #7 - ping test
  • #8 - download file test