Interface to merge multiple NC files in a specific order. This helps create auto printable 3d print files.
A single html file, load it into a browser. Relies on some CDN content, internet access is required.
Then read this:
The files increment y between 10 and 210 in increments of 10 and x between 10 and 210 in increments of 10 for each increment of y.
You need to place Mustache delimiters at every place you want the incremented number to appear, ie:
;Purge
G1 X{{x_value}} Y{{y_value}} F4000 ;move X/Y to min endstops
G1 Z0.3 F9000 ;Move the platform down 1mm
Notice the {{x_value}}, yea thats the one that gets turned into the number that you want incremented.
-
Name the files you want incremented
increment_file_n.gcode- where n is the number of the file. For example:increment_file_1.gcode, increment_file_2.gcode -
Upload your start and end files
-
Arrange the files in the interface with the start file at the top of the file arranging panel and the end file at the end of the panel.
-
You can only place incremental files in-between the start and the end, any other files will be ignored.
-
Click the
Make and increment filebutton, do a little dance and it'll download the gcode file all wrapped up.
If you have problems, prayer to the sky and hope.
WTFPL – Do What the Fuck You Want to Public License.