PySyncDroid

PySyncDroid is a Python 3 powered CLI tool providing a simple way to synchronize an Android device connected to a Linux PC via MTP over USB.

No special setup is required for the Android device.

Installation

pip install pysyncdroid

System requirements

PySyncDroid leverages lsusb, gvfs, mtp and readlink.

lsusb

Make sure you have lsusb installed on your computer as it is used to discover USB connected devices.

gvfs

Here is a list of gvfs related packages I have installed on my system (Ubuntu 14.04 64b):

dm@Z580:~$ dpkg --get-selections | grep gvfs
gvfs:amd64             install
gvfs-backends          install
gvfs-bin               install
gvfs-common            install
gvfs-daemons           install
gvfs-fuse              install
gvfs-libs:amd64        install

Utilities as:

gvfs-ls
gvfs-cp
gvfs-rm
gvfs-mkdir
gvfs-mount

must be present on your system and executable from the terminal.

mtp

Here is a list of mtp related packages I have installed on my system (Ubuntu 14.04 64b):

dm@Z580:~$ dpkg --get-selections | grep mtp
libmtp-common          install
libmtp-runtime         install
libmtp9:amd64          install

Usage

Connect your Android device with an USB cable to your computer
Unlock your device to notify the computer about its presence
- unlock is conducted only once and it is not necessary that the device stays unlocked during the synchronizing process
- Developer Options don't have to be enabled on the device
Make sure the device is connected as a Media device (MTP)
- you should now be able to see your device in computer file manager
Synchronize using PySyncDroid

Examples

For more details about how to use PySyncDroid and what options are available

dm@Z580:~/Desktop$ pysyncdroid -h

Synchronize contents of the Rock directory from computer to the device (vendor and model names are case insensitive)

dm@Z580:~/Desktop$ pysyncdroid -V samsung -M gt-i9300 -s ~/Music/Rock -d Card/Music/Rock

Synchronize contents of the Music directory from the device to computer, removing unmatched files (i.e. files, which are present only on computer, but not on the device) and overwriting existing files. Also, display what is going on (notice the -v flag). Child directories are automaticaly created in the destination directory (~/Music, in this case) as necessary.

dm@Z580:~$ pysyncdroid -ov -V samsung -M gt-i9300 -s Phone/Music -d Music -u remove

Provide a mapping file (see src2dest_example.txt for the file structure) if you need to synchronize more than a single directory.

dm@Z580:~/Desktop$ pysyncdroid -V samsung -M gt-i9300 -f /home/dm/Desktop/src2dest_example.txt -v

Device not found error

If you keep getting the following error message Device "<vendor> <model>" not found make sure the device is connected to the computer and you can access it via file manager. Run lsusb and check the output for desired vendor or model names. For example, I get the following string for my Samsung Galaxy SIII Bus 001 Device 011: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-I9300 Phone [Galaxy S III], GT-P7500 [Galaxy Tab 10.1] and therefore I use PySyncDroid as pysyncdroid -V samsung -M gt-i9300.

Limitations & known issues

source and destination must be a path to a directory
single file synchronization is not supported
device path must be a relative path starting with one of the device directories visible in the computer file manager, e.g.:
- Card/Music
- Phone/DCIM
- Tablet/Download

Sync from computer to device

If the sync process takes a bit longer (10+ minutes), it's very likely that you will get an error like: The name :<name> was not provided by any .service files or Message did not receive a reply (timeout by message bus).

It seems like the device drops the MTP connection after a certain amount of time/certaing amount of data transfered. Resetting USB connection (remove and plug the cable back to your computer) and unlocking the device again will reconnect it so you can re-run the last pysyncdroid command. It will continue to sync where it left off (assuming you are not using the -o flag).

DusanMadar/PySyncDroid