Pinned Repositories
envelope_generator_AS3310
This is a design for a Eurorack Envelope Generator based on the AS3310. Based on https://github.com/EchelonForce/poly_envelope_pcb
eurorack_power_strip
PCB design for euro rack power distribution.
eurorack_to_breadboard_psu
Kicad design of a power supply for bread board development of eurorack synthesizer modules.
midi_cv_gate_firmware
This the firmware for a Eurorack module with 16 CVs and 16 Gate outputs. It's meant to run on an Arduino Pro Mini.
midi_cv_gate_pcb
Design files of a Eurorack module with 16 CVs and 16 Gate outputs.
midi_cv_gate_test_fixture
This the KiCAD design of a test fixture for the MIDI to 16x16 CV Gate Module
noise_pcb
A PCB design for a Eurorack module based on the Noise2 chip
poly_envelope_pcb
A polyphonic envelope eurorack module design, in KiCAD.
vclfo10
A Eurorack LFO design based on the Electric Druid VCLFO10 chip.
vco_as3340
This is a design for a eurorack VCO using the AS3340 VCO chip.
EchelonForce's Repositories
EchelonForce/poly_envelope_pcb
A polyphonic envelope eurorack module design, in KiCAD.
EchelonForce/eurorack_power_strip
PCB design for euro rack power distribution.
EchelonForce/midi_cv_gate_pcb
Design files of a Eurorack module with 16 CVs and 16 Gate outputs.
EchelonForce/vclfo10
A Eurorack LFO design based on the Electric Druid VCLFO10 chip.
EchelonForce/eurorack_to_breadboard_psu
Kicad design of a power supply for bread board development of eurorack synthesizer modules.
EchelonForce/midi_cv_gate_firmware
This the firmware for a Eurorack module with 16 CVs and 16 Gate outputs. It's meant to run on an Arduino Pro Mini.
EchelonForce/midi_cv_gate_test_fixture
This the KiCAD design of a test fixture for the MIDI to 16x16 CV Gate Module
EchelonForce/mixer
A design for a Eurorack mixer using one op-amp.
EchelonForce/noise_pcb
A PCB design for a Eurorack module based on the Noise2 chip
EchelonForce/serialLCD
Writes IP addresses to Sparkfun Serial LCD on a Raspberry Pi
EchelonForce/vca_as3360
This is a design for a eurorack VCA using the AS3360 Dual VCA chip.
EchelonForce/vco_as3340
This is a design for a eurorack VCO using the AS3340 VCO chip.
EchelonForce/voltage_detector
This is a design for a eurorack voltage detector.
EchelonForce/envelope_generator_AS3310
This is a design for a Eurorack Envelope Generator based on the AS3310. Based on https://github.com/EchelonForce/poly_envelope_pcb
EchelonForce/alpha_pot_bob
Kicad design of a break out board for the Alpha potentiometers for breadboard use.
EchelonForce/analog_switch
This is a design for a eurorack module that puts an analog switch in the audio path.
EchelonForce/AoC_2017
Advent of Code 2017
EchelonForce/AoC_2018
Advent of Code 2018
EchelonForce/audio_jack_bob_MJ-355W
Kicad design of a break out board for the MJ-355W and Thonkiconn audio jacks for breadboard use.
EchelonForce/eurorack_cabinet
A Eurorack cabinet with 2000+HP.
EchelonForce/level_display_arduino_code
Arduino Code for a Eurorack Level Display Module
EchelonForce/level_display_pcb
KCAD project for a Eurorack Level Display Module
EchelonForce/lfo_stomp
A design for a Eurorack LFO module based on the ElectricDruid STOMPLFO chip.
EchelonForce/midi_cv_gate_test_fixture_firmware
This the firmware and test scripts for a test fixture for a Eurorack module with 16 CVs and 16 Gate outputs. It's meant to run on an Arduino Pro Mini.
EchelonForce/stm32f405_template_bob
This is a KiCAD design for a STM32F405RG based breakout board.
EchelonForce/toomanykittens-www
repo for dev of toomanykittensforbroadband.com
EchelonForce/translator-sumo-bot
Arduino Pro Mini code for sumo bot. http://www.robotdialogs.com/2012/06/translatormini-sumo-bot.html
EchelonForce/triple_attenuverter
A Eurorack attenuater module based on the Befaco dual attenuverter.
EchelonForce/vc_comparator
This is a design for a eurorack comparator module using an LM393.
EchelonForce/vcf_as3320_lp
This is a design for a eurorack low pass VCF using the AS3320 VCF chip.