2 problems reported when compiling ESP32-radio

[y2kats65]

I am new to the platformio IDE environment. When I compiled the ESP32-Radio (Aug 3, 2021 version), I am getting this problem reported for the main.cpp file even though the compile is reported as success and I have created an "include" directory under ESP32-Radio. Here are two lines of the problems reported:
Cannot find "C:\Users\Tony\Documents\Arduino\InternetRadioESP32Platformio\ESP32-Radio\include".
Cannot find "C:\Users\Tony\Documents\Arduino\InternetRadioESP32Platformio\ESP32-Radio\include".
In my main.cpp, I have made changes to these lines only
//#define BLUETFT // Works also for RED TFT 128x160
#define DUMMYTFT // Dummy display
I would like to test the code without the use of a display, just the ESP32 and VS1053. In previous attempts, I always got the error message that the VS1053 was not installed properly at startup even though I believe I have the wiring done correctly.
This are the messages reporting the VS1053:
D: Slow SPI, Testing VS1053 read/write registers...
D: VS1053 not properly installed!
I uploaded the code to the esp32. It seems the problem reported is not critical as the program starts up and run. It reports that I have a VS1003 and not VS1053. Also, the pin defined for pin_vs_dcs is 32 instead of 16 as mentioned in the doc. I used the web interface to change the pin to 16. Where do I define that I have VS1003 instead?

Please help.