Where is the ino file?
BX2ABT opened this issue · 6 comments
Can't find any ino file to compile with the Arduino IDE. The documentation states there should be an ino file, but this repository only has a wrapper file. Read something about PlatformIO, but no instructions. Please advice.
The file does not longer exist. But you may rename the main.cpp file to ESP32-Radio.ino.
Compiling with Arduino IDE is more complicated, as you need to install a number of libraries.
So I advice to switch to PlatformIO.
These libraries are required:
SD(esp32) @^1.0.5
knolleary/PubSubClient@^2.8
adafruit/Adafruit BusIO@^1.9.3
adafruit/Adafruit GFX Library@^1.10.4
adafruit/Adafruit ILI9341 @ ^1.5.9
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.7.5
ESP Async WebServer@^1.2.3
AsyncTCP@^1.1.1
Correction. The .ino file is still available for the V1 version of the Radio.
See here.
Thanks for the quick reply. Installing libraries is not such a problem, learning a new platform more and for me - being just a small tinkerer - I'd rather stick with the familiar Arduino IDE. But I get why a professional would choose PlatformIO.
Bedankt! En tot ziens.
Hi @Edzelf
Could I use the method you mentioned of renaming the main.cpp file in version 2 to compile it using the Arduino IDE?
I have version 1 running with chopping audio for some high bitrate stations and I would like to try version 2, but I have no experience with PlatformIO.
Thanks!
Yes.