Edzelf/ESP32Radio-V2

Sync TOD | Failed to obtain time

Opened this issue · 9 comments

igor756 commented

Hello, thank you for nice project.
I connected only ESP32 + VS1053B (slightly different PCB design then your).

After uploading default config through web (no change, only wifi) I am receiving following error in serial monitor:
[ 46647][I][main.cpp:4347] gettime(): [main] Sync TOD
[ 51657][W][main.cpp:4350] gettime(): [main] Failed to obtain time!

The sound is OK and I can change radio stations in web.
Can you advise where the problem can be?

Thank you and have a nice day.

Edzelf commented

It may take some time before the clock is synchronized. The message will disappear after some time.

  • 👍2
igor756 commented

Hmm, waited for 1 hour and no luck.
Added rotary encoder and now I am receiving:
[ 89830][W][AsyncTCP.cpp:930] _poll(): pcb is NULL
[ 91934][I][main.cpp:4347] gettime(): [main] Sync TOD
[ 96944][W][main.cpp:4350] gettime(): [main] Failed to obtain time!

Encoder works for mute/unmute and preset, though not working for volume control.
Any idea please?

igor756 commented

Update:
After very long time:
[1025218][I][main.cpp:4347] gettime(): [main] Sync TOD
[1030229][W][main.cpp:4350] gettime(): [main] Failed to obtain time!
[1109608][V][WiFiGeneric.cpp:362] _arduino_event_cb(): STA Disconnected: SSID: WOOD, BSSID: 08:45:d1:e2:0c:a0, Reason: 200
[1109609][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 5 - STA_DISCONNECTED
[1109613][I][main.cpp:2505] onError(): [main] MP3 host error Connection aborted
[1109616][W][WiFiGeneric.cpp:1057] _eventCallback(): Reason: 200 - BEACON_TIMEOUT
[1109624][I][main.cpp:2529] onDisConnect(): [main] Host disconnected

And the radio stopped working.
Can you help please?

Edzelf commented

Are you sure you have a working NTP timeserver configured?
See paragraph 2.2 in the documentation.

clk_dst = 1
clk_offset = -1
clk_server = pool.ntp.org

Port 123 UDP must be open for access (in/out).

igor756 commented

Now lot of different errors there, ie:
E (43750) gpio: gpio_set_level(226): GPIO output gpio_num error
E (43764) gpio: gpio_set_level(226): GPIO output gpio_num error
E (43769) gpio: gpio_set_level(226): GPIO ouGuru Meditation Error: Core 0 panic'ed (Unhandled debug exception).
Debug exception reason: Stack canary watchpoint triggered (Playtask)
...
Backtrace: 0x400925f4:0x3ffdbfc0 0x400907ad:0x3ffdc000 0x4008ec14:0x3ffdc030 0x4008ebc4:0xa5a5a5a5 |<-CORRUPTED

I will try to change ESP32 and VS1053 for different pieces to see if it is not a hardware error.
Thank you for help so far.

Edzelf commented
  • 👍1
igor756 commented

Here is what I receive after connecting to power from serial monitor Platformio. Only ESP32 and VS1053B (different PCB from yours) are connected. I am pretty much sure wiring is good.
Can you see what can be wrong here beside HW problems?
Thank you very much!

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (511) esp_core_dump_flash: No core dump��ѥѥ���found!
E (511) esp_core_dump_flash: No core dump partition found!
[ 8][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz

Starting ESP32-radio running on CPU 1 at 240 MHz.
[ 3043][I][main.cpp:2559] setup(): [main] Version Fri, 16 Jun 2023 07:30:00 GMT. Free memory 110580
[ 3045][I][main.cpp:2560] setup(): [main] Display type is DUMMY
[ 3141][I][main.cpp:2570] setup(): [main] SPIFFS is okay, space 1016801, used 33383
[ 3145][I][main.cpp:2591] setup(): [main] Found partition 'nvs ' at offset 0x009000 with size 20480
[ 3147][I][main.cpp:2591] setup(): [main] Found partition 'otadata ' at offset 0x00E000 with size 8192
[ 3157][I][main.cpp:2591] setup(): [main] Found partition 'spiffs ' at offset 0x2F0000 with size 1114112
[ 3169][I][main.cpp:2466] fillkeylist(): [main] Read 47 keys from NVS
[ 3181][I][main.cpp:1890] readIOprefs(): [main] pin_spi_sck set to 18
[ 3181][I][main.cpp:1890] readIOprefs(): [main] pin_spi_miso set to 19
[ 3185][I][main.cpp:1890] readIOprefs(): [main] pin_spi_mosi set to 23
[ 3202][I][main.cpp:2632] setup(): [main] GPIO0 is HIGH
[ 3212][I][main.cpp:2632] setup(): [main] GPIO2 is LOW, probably no PULL-UP
[ 3222][I][main.cpp:2632] setup(): [main] GPIO4 is HIGH
[ 3232][I][main.cpp:2632] setup(): [main] GPIO5 is HIGH
[ 3242][I][main.cpp:2632] setup(): [main] GPIO12 is HIGH
[ 3252][I][main.cpp:2632] setup(): [main] GPIO13 is HIGH
[ 3262][I][main.cpp:2632] setup(): [main] GPIO14 is HIGH
[ 3272][I][main.cpp:2632] setup(): [main] GPIO15 is HIGH
[ 3282][I][main.cpp:2632] setup(): [main] GPIO16 is HIGH
[ 3292][I][main.cpp:2632] setup(): [main] GPIO17 is HIGH
[ 3302][I][main.cpp:2632] setup(): [main] GPIO18 is HIGH
[ 3312][I][main.cpp:2632] setup(): [main] GPIO19 is HIGH
[ 3322][I][main.cpp:2632] setup(): [main] GPIO21 is HIGH
[ 3332][I][main.cpp:2632] setup(): [main] GPIO22 is HIGH
[ 3342][I][main.cpp:2632] setup(): [main] GPIO23 is HIGH
[ 3352][I][main.cpp:2632] setup(): [main] GPIO25 is HIGH
[ 3362][I][main.cpp:2632] setup(): [main] GPIO26 is HIGH
[ 3372][I][main.cpp:2632] setup(): [main] GPIO27 is HIGH
[ 3382][I][main.cpp:2632] setup(): [main] GPIO32 is HIGH
[ 3392][I][main.cpp:2632] setup(): [main] GPIO33 is HIGH
[ 3402][I][main.cpp:2632] setup(): [main] GPIO34 is LOW, probably no PULL-UP
[ 3412][I][main.cpp:2632] setup(): [main] GPIO35 is LOW, probably no PULL-UP
[ 3422][I][main.cpp:2632] setup(): [main] GPIO39 is LOW, probably no PULL-UP
[ 3423][I][main.cpp:1736] readprogbuttons(): [main] gpio_00 will execute uppreset = 1
[ 3426][I][main.cpp:1736] readprogbuttons(): [main] gpio_12 will execute upvolume = 2
[ 3434][I][main.cpp:1736] readprogbuttons(): [main] gpio_13 will execute downvolume = 2
[ 3442][I][main.cpp:1736] readprogbuttons(): [main] gpio_14 will execute stop
[ 3449][I][main.cpp:1736] readprogbuttons(): [main] gpio_17 will execute resume
[ 3456][I][main.cpp:1736] readprogbuttons(): [main] gpio_34 will execute station = icecast.omroep.nl:80/radio1-bb-mp3
[ 3466][I][main.cpp:2649] setup(): [main] Start DUMMY display
[ 3471][I][main.cpp:2258] mk_lsan(): [main] Create list with acceptable WiFi networks
[ 3479][I][WiFiMulti.cpp:84] addAP(): [WIFI][APlistAdd] add SSID: XXXX
[ 3485][I][main.cpp:2288] mk_lsan(): [main] Added XXXX to list of networks
[ 3493][I][WiFiMulti.cpp:84] addAP(): [WIFI][APlistAdd] add SSID: XXXX
[ 3498][I][main.cpp:2288] mk_lsan(): [main] Added XXXX to list of networks
[ 4021][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 4111][V][WiFiGeneric.cpp:340] _arduino_event_cb(): STA Started
[ 4111][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 2 - STA_START
[ 4611][I][main.cpp:847] listNetworks(): [main] Scan Networks
[ 10825][V][WiFiGeneric.cpp:383] _arduino_event_cb(): SCAN Done: ID: 128, Status: 0, Results: 18
[ 10826][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 1 - SCAN_DONE
[ 10831][I][main.cpp:849] listNetworks(): [main] Scan completed
[ 10836][I][main.cpp:858] listNetworks(): [main] Number of available networks: 18
[ 10843][I][main.cpp:876] listNetworks(): [main] 1 - XXXX Signal: -65 dBm, Encryption WPA2_PSK, Acceptable
[ 10854][I][main.cpp:876] listNetworks(): [main] 2 - XXXX Signal: -65 dBm, Encryption ????, Acceptable
[ 10865][I][main.cpp:876] listNetworks(): [main] 3 - XXXX Signal: -66 dBm, Encryption WPA2_PSK, Acceptable
[ 10876][I][main.cpp:876] listNetworks(): [main] 4 - XXXX Signal: -66 dBm, Encryption OPEN, Acceptable
[ 10887][I][main.cpp:876] listNetworks(): [main] 5 - XXXX Signal: -81 dBm, Encryption WPA2_PSK, Acceptable
[ 10899][I][main.cpp:876] listNetworks(): [main] 6 - XXXX Signal: -81 dBm, Encryption WPA2_PSK, Acceptable
[ 10910][I][main.cpp:876] listNetworks(): [main] 7 - XXXX Signal: -81 dBm, Encryption OPEN, Acceptable
[ 10921][I][main.cpp:876] listNetworks(): [main] 8 - XXXX Signal: -81 dBm, Encryption ????, Acceptable
[ 10932][I][main.cpp:876] listNetworks(): [main] 9 - XXXX Signal: -83 dBm, Encryption WPA2_PSK,
[ 10942][I][main.cpp:876] listNetworks(): [main] 10 - XXXX Signal: -84 dBm, Encryption WPA2_PSK,
[ 10953][I][main.cpp:876] listNetworks(): [main] 11 - XXXX Signal: -88 dBm, Encryption WPA2_PSK,
[ 10963][I][main.cpp:876] listNetworks(): [main] 12 - XXXX Signal: -89 dBm, Encryption WPA2_PSK,
[ 10973][I][main.cpp:876] listNetworks(): [main] 13 - XXXX Signal: -91 dBm, Encryption OPEN, Acceptable
[ 10984][I][main.cpp:876] listNetworks(): [main] 14 - XXXX Signal: -92 dBm, Encryption WPA2_PSK, Acceptable
[ 10996][I][main.cpp:876] listNetworks(): [main] 15 - XXXX Signal: -92 dBm, Encryption WPA2_PSK,
[ 11006][I][main.cpp:876] listNetworks(): [main] 16 - XXXX Signal: -92 dBm, Encryption WPA2_PSK,
[ 11017][I][main.cpp:876] listNetworks(): [main] 17 - XXXX Signal: -93 dBm, Encryption WPA2_PSK, Acceptable
[ 11028][I][main.cpp:876] listNetworks(): [main] 18 - XXXX Signal: -94 dBm, Encryption WPA2_PSK,
[ 11038][I][main.cpp:880] listNetworks(): [main] End of list
[ 11069][I][main.cpp:949] nextPreset(): [main] nextPreset is 0
E (11078) gpio: gpio_set_level(226): GPIO output gpio_num error
E (11079) gpio: gpio_set_level(226): GPIO output gpio_num error
[ 11095][E][esp32-hal-gpio.c:102] __pinMode(): Invalid pin selected
[ 11095][E][esp32-hal-gpio.c:102] __pinMode(): Invalid pin selected
[ 11097][E][esp32-hal-gpio.c:102] __pinMode(): Invalid pin selected
E (11097) gpio: gpio_set_level(226): GPIO output gpio_num error
E (11102) gpio: gpio_set_level(226): GPIO output gpio_num error
[ 11234][I][VS1053.cpp:127] testComm(): [VS1053] Slow SPI, Testing VS1053 read/write registers...
[ 11234][E][VS1053.cpp:130] testComm(): [VS1053] VS1053 not properly installed!
[ 11239][E][esp32-hal-gpio.c:102] __pinMode(): Invalid pin selected
[ 11245][I][main.cpp:2697] setup(): [main] Connect to network
[ 11251][V][WiFiGeneric.cpp:343] _arduino_event_cb(): STA Stopped
[ 11256][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 3 - STA_STOP
[ 12261][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 12265][V][WiFiGeneric.cpp:340] _arduino_event_cb(): STA Started
[ 12266][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 2 - STA_START
[ 19478][V][WiFiGeneric.cpp:383] _arduino_event_cb(): SCAN Done: ID: 129, Status: 0, Results: 21
[ 19479][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 1 - SCAN_DONE
[ 19484][I][WiFiMulti.cpp:114] run(): [WIFI] scan done
[ 19488][I][WiFiMulti.cpp:119] run(): [WIFI] 21 networks found
[ 19494][D][WiFiMulti.cpp:149] run(): ---> 0: [1][08:45:D1:E2:0C:A0] XXXX (-66) *
[ 19501][D][WiFiMulti.cpp:151] run(): 1: [1][08:45:D1:E2:0C:A2] XXXX (-66)
[ 19509][D][WiFiMulti.cpp:151] run(): 2: [1][08:45:D1:E2:0C:A3] XXXX (-66) *
[ 19517][D][WiFiMulti.cpp:151] run(): 3: [1][08:45:D1:E2:0C:A1] XXXX (-67) *
[ 19525][D][WiFiMulti.cpp:151] run(): 4: [11][D8:EC:E5:C4:11:1D] XXXX (-79) *
[ 19533][D][WiFiMulti.cpp:151] run(): 5: [11][DA:1D:E5:C4:11:1E] XXXX (-79) *
[ 19541][D][WiFiMulti.cpp:151] run(): 6: [6][08:45:D1:E2:3A:61] XXXX (-81) *
[ 19549][D][WiFiMulti.cpp:151] run(): 7: [6][08:45:D1:E2:3A:63] XXXX (-81) *
[ 19558][D][WiFiMulti.cpp:149] run(): ---> 8: [6][08:45:D1:E2:3A:60] XXXX (-81) *
[ 19565][D][WiFiMulti.cpp:151] run(): 9: [6][08:45:D1:E2:3A:62] XXXX-Guests (-82)
[ 19573][D][WiFiMulti.cpp:151] run(): 10: [11][EC:F4:0C:15:CF:A0] XXXX (-89) *
[ 19580][D][WiFiMulti.cpp:151] run(): 11: [11][EC:F4:0C:15:CF:A1] XXXX (-90) *
[ 19588][D][WiFiMulti.cpp:151] run(): 12: [1][F8:C2:88:2E:40:72] XXXX (-91)
[ 19596][D][WiFiMulti.cpp:151] run(): 13: [1][F8:C2:88:2E:40:73] XXXX (-91) *
[ 19605][D][WiFiMulti.cpp:149] run(): ---> 14: [1][F8:C2:88:2E:40:70] XXXX (-92) *
[ 19612][D][WiFiMulti.cpp:151] run(): 15: [1][F8:C2:88:2E:40:71] XXXX (-92) *
[ 19620][D][WiFiMulti.cpp:151] run(): 16: [6][9E:30:5B:8E:BC:DA] XXXX (-92) *
[ 19630][D][WiFiMulti.cpp:151] run(): 17: [1][DA:29:E5:C4:1F:2A] XXXX (-93) *
[ 19638][D][WiFiMulti.cpp:151] run(): 18: [6][24:81:3B:B7:F2:E0] XXXX (-93) *
[ 19646][D][WiFiMulti.cpp:151] run(): 19: [6][24:81:3B:B7:D7:C0] XXXX (-94) *
[ 19653][D][WiFiMulti.cpp:151] run(): 20: [6][24:81:3B:B7:F2:E1] XXXX (-94) *
[ 19661][I][WiFiMulti.cpp:160] run(): [WIFI] Connecting BSSID: 08:45:D1:E2:0C:A0 SSID: XXXX Channel: 1 (-66)
[ 19671][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[ 20485][V][WiFiGeneric.cpp:355] _arduino_event_cb(): STA Connected: SSID: XXXX, BSSID: 08:45:d1:e2:0c:a0, Channel: 1, Auth: WPA2_PSK
[ 20487][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 4 - STA_CONNECTED
[ 23082][V][WiFiGeneric.cpp:369] _arduino_event_cb(): STA Got New IP:10.100.133.44
[ 23083][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 7 - STA_GOT_IP
[ 23086][D][WiFiGeneric.cpp:1098] _eventCallback(): STA IP: 10.100.133.44, MASK: 255.255.254.0, GW: 10.100.133.254
[ 23096][I][WiFiMulti.cpp:174] run(): [WIFI] Connecting done.
[ 23101][D][WiFiMulti.cpp:175] run(): [WIFI] SSID: XXXX
[ 23106][D][WiFiMulti.cpp:176] run(): [WIFI] IP: 10.100.133.44
[ 23112][D][WiFiMulti.cpp:177] run(): [WIFI] MAC: 08:45:D1:E2:0C:A0
[ 23118][D][WiFiMulti.cpp:178] run(): [WIFI] Channel: 1
[ 23123][I][main.cpp:1618] connectwifi(): [main] SSID = XXXX
[ 23128][I][main.cpp:1622] connectwifi(): [main] IP = 10.100.133.44
[ 23134][I][main.cpp:2707] setup(): [main] Start web server
[ 23141][I][main.cpp:2717] setup(): [main] Network found. Starting clients
[ 23152][I][main.cpp:2751] setup(): [main] MDNS responder started
[ 24155][I][main.cpp:2796] setup(): [main] Rotary encoder is disabled (-1/-1/-1)
[ 24156][I][main.cpp:4347] gettime(): [main] Sync TOD
[ 29166][W][main.cpp:4350] gettime(): [main] Failed to obtain time!
[ 29169][I][main.cpp:949] nextPreset(): [main] nextPreset is 6
[ 29271][I][main.cpp:3383] radiofuncs(): [main] Radiofuncs cmd is 1
[ 29271][I][main.cpp:4414] playtask(): [main] QSTOPSONG
[ 29272][I][main.cpp:1383] connecttohost(): [main] Connect to host icecast.omroep.nl:80/radio1-bb-mp3
E (40977) gpio: gpio_set_level(226): GPIO output gpio_num error
E (40991) gpio: gpio_set_level(226): GPIO output gpio_num error
E (40996) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41003) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41008) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41015) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41020) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41026) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41032) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41037) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41041) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41048) gpio: gpio_set_level(226): GPIO output gpio_num error
[ 29355][I][main.cpp:2518] onConnect(): [main] Connected to host at 145.58.52.181 on port 80

E (41068) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41072) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41079) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41083) gpio: gpio_set_level(226): GPIO outpu[ 29382][I][main.cpp:1444] connecttohost(): [main] send GET command
t gpio_num error
E (41098) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41101) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41106) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41112) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41119) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41123) gpio: gpio_set_level(226): GPIO output gpio_num er[ 29423][I][main.cpp:3631] handlebyte_ch(): [main] Switch to HEADER
[ 29429][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: Server: Icecast
[ 29436][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: Connection: Close
[ 29443][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: Pragma: no-cache
[ 29450][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: Expires: Thu, 19 Nov 1981 08:52:00 GMT
[ 29459][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: Cache-Control: no-store, no-cache, private
[ 29469][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: Content-Type: audio/mpeg
[ 29476][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-br: 192
[ 29483][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: ice-audio-info: samplerate=48000;channels=2;bitrate=192
[ 29493][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-genre: Talk
[ 29500][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-metadata: 1
[ 29507][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-name: NPO Radio1
[ 29515][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-pub: 0
[ 29521][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-url: http://www.radio1.nl
[ 29529][I][main.cpp:3652] handlebyte_ch(): [main] Headerline: icy-metaint: 16000
[ 29536][I][main.cpp:3722] handlebyte_ch(): [main] Switch to DATA, bitrate is 192, metaint is 16000
ror
E (41251) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41261) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41264) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41268) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41275) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41279) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41295) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41296) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41298) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41302) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41309) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41313) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41320) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41325) gpio: gpio_set_level(226): GPIO output gpio_num error
E (41333) gpio: gpio_set_level(226): GPIO output gpio_num error
Guru Meditation Error: Core 0 panic'ed (Unhandled debug exception).
Debug exception reason: Stack canary watchpoint triggered (Playtask)
Core 0 register dump:
PC : 0x4008eb28 PS : 0x00060336 A0 : 0x4008599e A1 : 0x3ffdc610
A2 : 0x00000000 A3 : 0x00060323 A4 : 0x00060320 A5 : 0xb83fc000
A6 : 0x007d2250 A7 : 0x003fffff A8 : 0x800915df A9 : 0x3ffdc6a0
A10 : 0x3ffc7910 A11 : 0x3ffc7910 A12 : 0x00000000 A13 : 0x00060323
A14 : 0x00060323 A15 : 0x00000001 SAR : 0x00000004 EXCCAUSE: 0x00000001
EXCVADDR: 0x00000000 LBEG : 0x4008bb95 LEND : 0x4008bba5 LCOUNT : 0xfffffff9

Backtrace: 0x4008eb25:0x3ffdc610 0x4008599b:0x3ffdc6e0 0x4008f661:0x3ffdc700 0x4008f7ab:0x3ffdc740 0x40085cf7:0x3ffdc760 0x40085dcd:0x3ffdc790 0x400fffa9:0x3ffdc7b0 0x400ff22f:0x3ffdc7d0 0x400fe7e5:0x3ffdc7f0 0x4008abf1:0x3ffdc810 0x40089a5a:0x3ffdc830 0x40089ae4:0x3ffdc850 0x40089fd1:0x3ffdc880 0x401969d3:0x3ffdc8b0 0x4018e5db:0x3ffdc8d0 0x4018e759:0x3ffdcbe0 0x401a7c85:0x3ffdcc10 0x4012b5d2:0x3ffdcc40 0x4012b66f:0x3ffdcc70 0x400f20e1:0x3ffdccf0 0x400efa0d:0x3ffdcd30 0x400ed48d:0x3ffdcd50 0x400ed550:0x3ffdcd70 0x400ed97c:0x3ffdcd90 0x400d35e5:0x3ffdcdd0

#0 0x4008eb25:0x3ffdc610 in _frxt_setup_switch at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/freertos/port/xtensa/portasm.S:79
#1 0x4008599b:0x3ffdc6e0 in _xt_lowint1 at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/freertos/port/xtensa/xtensa_vectors.S:1099
#2 0x4008f661:0x3ffdc700 in xQueueGenericSend at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/freertos/queue.c:946
#3 0x4008f7ab:0x3ffdc740 in xQueueGiveMutexRecursive at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/freertos/queue.c:685
#4 0x40085cf7:0x3ffdc760 in lock_release_generic at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/newlib/locks.c:199
#5 0x40085dcd:0x3ffdc790 in _lock_release_recursive at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/newlib/locks.c:211
#6 0x400fffa9:0x3ffdc7b0 in uart_write at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/vfs/vfs_uart.c:211
(inlined by) uart_write at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/vfs/vfs_uart.c:192
#7 0x400ff22f:0x3ffdc7d0 in console_write at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/vfs/vfs_console.c:73
#8 0x400fe7e5:0x3ffdc7f0 in esp_vfs_write at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/vfs/vfs.c:431 (discriminator 4)
#9 0x4008abf1:0x3ffdc810 in __swrite at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/stdio.c:94
#10 0x40089a5a:0x3ffdc830 in __sflush_r at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/fflush.c:224
#11 0x40089ae4:0x3ffdc850 in _fflush_r at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/fflush.c:278
#12 0x40089fd1:0x3ffdc880 in __sfvwrite_r at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/fvwrite.c:251
#13 0x401969d3:0x3ffdc8b0 in __sprint_r at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/vfprintf.c:433
(inlined by) __sprint_r at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/vfprintf.c:403
#14 0x4018e5db:0x3ffdc8d0 in _vfprintf_r at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/vfprintf.c:1781 (discriminator 1)
#15 0x4018e759:0x3ffdcbe0 in vprintf at /builds/idf/crosstool-NG/.build/xtensa-esp32-elf/src/newlib/newlib/libc/stdio/vprintf.c:34 (discriminator 5)
#16 0x401a7c85:0x3ffdcc10 in esp_log_writev at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/log/log.c:200
#17 0x4012b5d2:0x3ffdcc40 in __wrap_esp_log_writev at /Users/ficeto/Desktop/ESP32/ESP32S2/esp32-arduino-lib-builder/components/esp-insights/components/esp_diagnostics/src/esp_diagnostics_log_hook.c:452
#18 0x4012b66f:0x3ffdcc70 in __wrap_esp_log_write at /Users/ficeto/Desktop/ESP32/ESP32S2/esp32-arduino-lib-builder/components/esp-insights/components/esp_diagnostics/src/esp_diagnostics_log_hook.c:469
#19 0x400f20e1:0x3ffdccf0 in gpio_set_level at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/driver/gpio.c:226 (discriminator 5)
#20 0x400efa0d:0x3ffdcd30 in __digitalWrite at /home/user/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-gpio.c:145
#21 0x400ed48d:0x3ffdcd50 in VS1053::data_mode_off() const at lib/codecs/src/VS1053.cpp:39
#22 0x400ed550:0x3ffdcd70 in VS1053::sdi_send_fillers(unsigned char) at lib/codecs/src/VS1053.cpp:99
#23 0x400ed97c:0x3ffdcd90 in VS1053::stopSong() at lib/codecs/src/VS1053.cpp:275
#24 0x400d35e5:0x3ffdcdd0 in playtask(void*) at src/main.cpp:4418

ELF file SHA256: 616e7671ae3a569f

E (12184) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee

igor756 commented

And it keeps resetting again and again

Edzelf commented

I miss the following settings in the debug logging:

D: pin_vs_cs set to 5
D: pin_vs_dcs set to 16
D: pin_vs_dreq set to 4

Your pins are probably different, but you should see them in the output.