Issues
- 0
avr128da28 to be programmed by arduino uno?
#76 opened by hoka83 - 11
Doesn't work on AVR-DA
#27 opened by WestfW - 4
- 0
Can at tiny 1616 act as programmer?
#74 opened by MFahreza69 - 0
- 2
- 14
Using the jtag2updi chip as a serial bridge
#16 opened by MCUdude - 5
Using JTAG2UPDI to inject NVMPROG key
#19 opened by MCUdude - 7
UPDI programming with level translation
#41 opened by vladbelous - 2
jtag2updi broken with avrdude-7.0
#69 opened by mhx - 1
Question: programing atmega4809 chips?
#71 opened by GlennWSo - 5
Arduino Nano Every as programmer
#48 opened by bdoubleu86 - 6
Supported chips to use as programmer?
#42 opened by sideswiper22 - 0
- 15
UPDI on ATTiny814
#24 opened by haindvn - 3
erasing locked AVR32DA28 - impossible
#66 opened by flexphperia - 2
Arduino uno progrramer error
#68 opened by muhammetfaik - 1
Status LED feature
#67 opened by jamesarm97 - 14
Embedding inside an Arduino Project
#11 opened by s-ol - 3
Can't unlock ATTiny1624
#63 opened by Strat00s - 1
Unable to program ATMega4809
#62 opened by vjkolaventy - 7
- 8
- 1
Change Programmer Pin
#60 opened by ElectronicSmokeUK - 3
Error programming ATTiny1614: bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE
#45 opened by kais58 - 3
Which parts support NVM version 2?
#58 opened by llinjupt - 3
Can't unlock a locked ATtiny404 with chip erase - "avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ ILLEGAL_MCU_STATE"
#43 opened by willlewin - 2
Suppressing avrdude harmless warning on "Cannot locate “flash” and “boot” memories in description"
#54 opened by d3lta-v - 5
Unable to erase ATtiny402
#53 opened by Frogieder - 1
- 1
Error in avrdude.conf file!
#51 opened by dev-ahmed-ibrahim - 0
Feature request: series 2 support
#49 opened by trichl - 6
erase not working after lockbit set
#44 opened by mechatroniks-git - 3
ATtiny1607 at 8MHz with Arduino IDE
#46 opened by Alailek - 9
avrdude.conf is broken
#40 opened by mikrocoder - 5
modified avrdude.conf has errors
#36 opened by maartenvanschagen - 2
-C option
#37 opened by maartenvanschagen - 2
- 5
JICE_io::flush() is brittle
#29 opened by SpenceKonde - 5
missing 9 series
#34 opened by mikrocoder - 1
Could jtag2updi be ported to a CH552?
#32 opened by DustinWatts - 7
ATtiny402 signatures
#12 opened by SimonMerrett - 2
- 2
Port manipulation issue/question
#28 opened by SpenceKonde - 2
- 1
- 2
JTAG2UPDI on Attiny1614
#23 opened by robsonos - 7
Arduino Mega 2560 connection
#14 opened by grogcw - 2
Verify Flash after Programming
#17 opened by mikrocoder - 1
AVR JTAG ICE no voltage on VTref
#15 opened by freemovers