Pinned Repositories
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
BTT_SKR_13_14_14T_SD-DFU-Bootloader
This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TURBO to fix the high pitch sound coming out of the CR10_STOCKDISPLAY it is located on the bootloder_bin/compiled_bootloader_bin/ directory.
CG_scale
Schwerpunktwaage
FormbotTroodon
Gemini-S
IoT-Stack-tutorial
klipper
Klipper is a 3d-printer firmware
Klipper-Adaptive-Meshing-Purging
A unique leveling solution for Klipper-enabled 3D printers!
klipper-macros
A collection of useful macros for the Klipper 3D printer firmware
klipper-macros-Desuuuu
A collection of my Klipper G-code macros.
Elchschmied's Repositories
Elchschmied/BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
Elchschmied/BTT_SKR_13_14_14T_SD-DFU-Bootloader
This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TURBO to fix the high pitch sound coming out of the CR10_STOCKDISPLAY it is located on the bootloder_bin/compiled_bootloader_bin/ directory.
Elchschmied/CG_scale
Schwerpunktwaage
Elchschmied/FormbotTroodon
Elchschmied/Gemini-S
Elchschmied/IoT-Stack-tutorial
Elchschmied/klipper
Klipper is a 3d-printer firmware
Elchschmied/Klipper-Adaptive-Meshing-Purging
A unique leveling solution for Klipper-enabled 3D printers!
Elchschmied/klipper-macros
A collection of useful macros for the Klipper 3D printer firmware
Elchschmied/klipper-macros-Desuuuu
A collection of my Klipper G-code macros.
Elchschmied/Klipper_ToolChanger
A Klipper plugin and macros for controling a Toolchanging 3D printer
Elchschmied/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Elchschmied/micron_klipper_config
Elchschmied/pymodbus
A full modbus protocol written in python
Elchschmied/Special_Configurations_Marlin
In this repository there are the configuration files and releases for the Professional firmware with several features enabled. You can use the Configurator if you want to compile your own custom set of features. You can also request a pre-made binary for a small contribution on the Patreon site.
Elchschmied/Tronxy-X5SA-Printer.cfg-and-more-for-Klipper
Klipper Repository with all Stuff for Klipper/Mainsail and Tronxy X5SA Chitu V6-V9 STM32F103
Elchschmied/zippy_guides
Guides for Klipper Things