udev_rule_fusee_gelee_raspberry
This scrip creates a script file to run fusee gelee after connecting the switch in RCM mode to a Raspberry Pi 3 Its supporting 4 diffrent payloads binded on all usb ports of the raspberry pi
Setup Steps on Pi3:
sudo apt-get install git python libusb-1.0-0-dev
git clone https://github.com/walac/pyusb
cd pyusb && sudo python3 setup.py install
cd ..
git clone https://github.com/reswitched/fusee-launcher
cd fusee-launcher/
mkdir payloads
cd payloads
wget https://t.co/d5nCLNa7E5 -O fusee.bin
wget https://github.com/CTCaer/hekate/releases/download/v3.2/hekate_ctcaer_3.2.bin
Currently the usb ports are assigned as follows:
Port 2: fusee.bin
Port 3: hekate_ctcaer_3.2.bin
Port 4: hekate_ctcaer_3.2.bin
Port 5: fusee.bin
If you want to change the payloads to something else you can edit the fusee.sh
Special Thanks to Team ReSwitched https://github.com/reswitched and Kate Temkin https://github.com/ktemkin for Fusee Gelee and Darkmelman for the original Project :-)