UPDATE MAY/2023 If the server loads but there is no feed, try to change the .sh file at the end to match you /dev/video# After that it should work by running the .sh file
This bash script will install MJPG-STREAMER on your RPi3
To access the USB camera connected to the RPI over IP, in your browser go to:
http://123.123.10.123:8085/index.html
Follow this guide if you encounter issues: https://www.sigmdel.ca/michel/ha/rpi/streaming_en.html
Updated instructions:\n https://blog.miguelgrinberg.com/post/how-to-build-and-run-mjpg-streamer-on-the-raspberry-pi
Need to build the downloaded .zip using make install and then cp files to system
Need to copy files from the build mjpg-streamer folder into the system files sudo cp mjpg_streamer /usr/local/bin \n sudo cp output_http.so input_file.so /usr/local/lib/ \n sudo cp -R www /usr/local/www \n mkdir /tmp/stream \n LD_LIBRARY_PATH=/usr/local/lib mjpg_streamer -i "input_file.so -f /tmp/stream -n pic.jpg" -o "output_http.so -w /usr/local/www" <--This will start the server on http://192.168.0.x:8080/