EnviroDIY/Arduino-SDI-12
An Arduino library for SDI-12 communication with a wide variety of environmental sensors. This library provides a general software solution, without requiring any additional hardware.
C++BSD-3-Clause
Issues
- 2
Examples Will Now Compile For Arduino R4 But Still No Communication To/From SDI-12 Sensor
#145 opened by electromechpro - 2
Doesn't work on Arduino GIGA R1
#138 opened by merondibia - 2
ESP32 support.
#66 opened by peterj43 - 2
Support for Arduino R4 Renesas chip?
#128 opened by electromechpro - 8
Can not read measurements
#89 opened by ErezFeuer - 2
i am using hydros21 sensor which is working on sdi12 protocol and currently i am stuck in a issue which is sensor is not working properly and not given data correctly so any one help me for this
#141 opened by praveerkr - 11
Adding a Direction Control Pin
#87 opened by rocketscream - 9
CRC Validation for SDI12 v1.4
#75 opened by KareemWaheed - 0
- 1
Missing check for 8.33mS marking before checking address for sdi12 slave/sensor
#121 opened by ZachaRuba - 4
ESPhome
#120 opened by luis-nagaki - 2
Question.
#113 opened by Sfrjoshpro - 0
new tinyAVR boards support. tips?
#115 opened by aliandreur - 1
- 3
Documentation missing?
#94 opened by WestfW - 1
- 2
ASR6501 - Cubecell support
#88 opened by ManuelJimenezBuendia - 7
Support for Arduino Uno WiFi Rev2 (ATMEGA4809)
#55 opened by milenovic - 4
Watchdog Problem SAMD21
#86 opened by nunomiguelferreira - 9
SDI12 - ESP32 NOT OPEN BUS
#85 opened by matiasAS - 1
IDE 2.0 compilation problem
#81 opened by murty206 - 3
Stm32 compatibility
#61 opened - 2
- 16
Sparkfun Artemis and CS320 pyranometer
#83 opened by jvoermans - 2
CRC Implementation
#65 opened by peterj43 - 1
- 1
NRF52 Support
#80 opened by KevinUrrutia - 0
- 8
SDI-12 Data error
#76 opened by nsecgo - 3
NodeMCU Compatibility
#73 opened by KareemWaheed - 1
Data read error
#74 opened by miguepoloc - 8
Compatibility with ESP8266
#47 opened by matiasAS - 3
- 2
SAMD21 issue
#62 opened by acutxfarm - 2
Corrupted data on SDI-12 interface
#60 opened by tsujido3r - 3
not working with mkr1300
#59 opened by krishnakulkarni88 - 5
Example with SDI-12 Sonde
#58 opened by augustodejesus - 4
Lockup on SAMD Based Arduino MKR 1500
#53 opened by bleckers - 5
ATmega328p using 8MHz internal oscillator
#51 opened by mkals - 1
Reset timer 2 prescaler values back to initial values in end() and destructor.
#45 opened by SRGDamia1 - 1
- 1
Compatibility with arduino Due
#48 opened by matiasAS - 1
- 3
- 1
Communicating with other sensors
#36 opened by lilcano - 3
SDI-12 Transparent Mode
#35 opened by AshuJoshi - 0
- 1
inconsistent results
#28 opened by lilcano - 7
Help with Using library
#17 opened by lilcano - 0
Can the Pro Mini handle this library?
#16 opened by rdhambrick