EnviroDIY/SensorModbusMaster
An Arduino library to act as Modbus Master to control a sensor/slave
C++BSD-3-Clause
Issues
- 0
getRegisters() always adds 25ms delay
#27 opened by SushiRemover - 2
Support for Portenta board
#26 opened by prdipalma86 - 5
get float 32 from register
#25 opened by Fluxanode - 2
Example readWriteRegister
#24 opened by Fluxanode - 2
Serial to Serial?
#16 opened by 3h50 - 1
Lightening protection suggestion
#15 opened by neilh10 - 22
- 1
Add an example sketch
#9 opened by SRGDamia1 - 19
- 5
The library does not support esp8266
#20 opened by 15670941101 - 2
tx and rx control
#22 opened by Fluxanode - 2
Support Mayfly1.1
#21 opened by neilh10 - 4
need Help for function CDAB to float32
#7 opened by c0zm0z - 1
Support for CustomSoftwareSerial library?
#19 opened by KhurramFHassan - 2
Add better Hardware documentation
#3 opened by aufdenkampe - 11
Spin the Mayfly Wing into its own repo
#8 opened by SRGDamia1 - 25
Board is stuck
#13 opened by WildPoYo - 1
failure of _debugStream->
#11 opened by neilh10 - 1
Arduino hangs on any read attempt
#10 opened by saspol - 1
Library is good but..
#6 opened by luisgcu - 0
Add commands for reading/writing coils
#1 opened by SRGDamia1