EnviroDIY/YosemitechModbus

Issues

• Y505-A Aquaculture Optical Dissolved Oxygen Sensor support?

  #34 opened a year ago by primus192
  6

• Figure out pH calibration equations & coefficients

  #16 opened 4 years ago by aufdenkampe
  2

• Develop calibration spreadsheets & instructions

  #14 opened 4 years ago by aufdenkampe
  3

• Problems with the GetValues-TimingTest.ino

  #25 opened a year ago by SteveClifto
  2

• Test CHL sensor

  #2 opened a year ago by aufdenkampe
  6

• Problem - No communication with Y514 Chlorophyll sensor with brush

  #35 opened a year ago by primus192
  3

• V4.0 specified in ModularSensors but not released

  #32 opened 2 years ago by neilh10
  5

• Support for Y700 Pressure/Depth sensor

  #29 opened 2 years ago by aufdenkampe
  1

• Get Y4000 to output Chl & BGA readings

  #13 opened 2 years ago by aufdenkampe
  1

• Create `GetValuesTimingTest.ino` to optimize sensor timings

  #15 opened 2 years ago by aufdenkampe
  1

• Restore calibrators

  #28 opened 2 years ago by aufdenkampe
  1

• Restore backward compatibility with Y550

  #21 opened 2 years ago by aufdenkampe
  5

• Y4000 Not sending correct responses

  #23 opened 3 years ago by TzionCastillo1
  3

• Y533 and Y532 Deviation In Measurements

  #19 opened 3 years ago by GArrigotti-cws
  9

• Create an example sketch to set calibration parameters

  #18 opened 4 years ago by aufdenkampe
  0

• Review new YosemiTech Modbus Manuals for changes

  #5 opened 4 years ago by aufdenkampe
  1

• Add support for Y4000 Multi-Parameter Sonde

  #6 opened 4 years ago by aufdenkampe
  3

• Does not work with esp8266 version >=2.6.0

  #17 opened 5 years ago by crash007
  12

• Optimize approach for combined voltage boost & RS-485 conversion

  #10 opened 7 years ago by aufdenkampe
  6

• Add info on power use to main ReadMe

  #11 opened 7 years ago by aufdenkampe
  1

• Temp and Param switched in Example/GetValues

  #9 opened 7 years ago by aufdenkampe
  2

• Test changing brush interval

  #3 opened 7 years ago by aufdenkampe
  29

• Improve info about serial ports in ReadMe

  #4 opened 7 years ago by SRGDamia1
  0

• Allow real altitude/baro pressure to be entered for DO

  #8 opened 7 years ago by SRGDamia1
  0

• Add power pin to library

  #1 opened 7 years ago by SRGDamia1
  2