v4l2-ctl-rest-api

RESTful API to control USB camera settings via v4l2-ctl.

Installing

git clone https://github.com/Ernie3/v4l2-ctl-rest-api.git
cd v4l2-ctl-rest-api
npm install
npm start

How to Use this API

All endpoints follow the structure GET /{device}/{setting} or POST /{device}/{setting}/{value}. You can also get the maximum and minimum values of a setting via GET /{setting}/max_value or GET /{setting}/min_value.

Currently Supported Setting Controls

You can get the currently supported settings using GET /settings. This will return all of the supported settings as an array of strings.

Example

If you have a USB device connected to /dev/video0, you can get its current brightness via GET /0/brightness, or set its brightness via POST /0/brightness/130. Or for example if you want to address a camera that is plugged into the top right USB port by its static path (by its USB port), flip the value for by_path in config.json then you can POST /1.3/brightness/130

How to use by-path (by USB port)

Template

Top Left USB | Top Right USB
----------------------------
Bot Left USB | Bot Right USB

For Raspberry Pi Model B+

1.1.2 | 1.3
-----------
1.1.3 | 1.2

Setting up v4l2-ctl-rest-api to Run on Boot

./service_manager.sh argument

install - installs v4l2-ctl-rest-api service and enables start on boot
start - starts v4l2-ctl-rest-api via systemctl (service must be installed)
stop - stops v4l2-ctl-rest-api via systemctl (service must be installed)
enable - enables v4l2-ctl-rest-api to start on boot (service must be installed)
disable - disables v4l2-ctl-rest-api from starting on boot (service must be installed)
uninstall - completely removes v4l2-ctl-rest-api service from systemctl

Ernie3/v4l2-ctl-rest-api