/HiwonderRPI

Raspberry PI library to control Hiwonder UART servos

Primary LanguageC++GNU General Public License v3.0GPL-3.0

HiwonderRPI

HiwonderRPI is a C++ library to control Hiwonder UART servos with a Raspberry PI.
Even if it uses some of the modern C++ features, it is designed with performance and usability in mind.

Install & use

  1. Make sure you have git, g++(or equivalent), cmake and wiringPi installed:

    $ sudo apt-get install git g++ cmake wiringpi

  2. Make sure UART is activated on your RPI

    $ sudo raspi-config

    • 5 Interfacing Options
    • P6 Serial
    • login shell to be accessible over serial?
    • Serial Port Hardware?
    • Finish

  3. Download the project

    $ git clone https://github.com/Escain/HiwonderRPI ./hiwonder_rpi
    $ cd ..

  4. Configure the project

    $ mkdir build_hiwonder_rpi
    $ cd build_hiwonder_rpi
    $ cmake ../hiwonder_rpi

  5. Build the project:

    $ make

  6. Test something

    $ sudo ./hiwonder

Feedback & Suggestions

For any feedback or suggestion:

https://github.com/Escain/HiwonderRPI/discussions

Issues

If you found a bug or issue, feel free to open an issue at https://github.com/Escain/HiwonderRPI/issues

If you are not sure it is an issue, feel free to open a feedback/discussion: https://github.com/Escain/HiwonderRPI/discussions

Questions

Please, prefer to post questions at https://www.stackoverflow.com or https://electronics.stackexchange.com and use the tag [hiwonderrpi]. This make them available for other users as well.