Exawind/amr-wind

Issues

• openfast_stop_time not updated on restart

  #1196 opened 2 months ago by lawrenceccheung
  3

• Segfault on GPU in abl_meso_input_*pa

  #1250 opened 17 days ago by marchdf
  0

• Segfault on GPU in freestream_godunov_inout

  #1246 opened 17 days ago by marchdf
  0

• Documentation request - derived quantities

  #1240 opened 18 days ago by mbkuhn
  0

• Contradictory input file behavior possible for ABLMeanBoussinesq

  #1237 opened 18 days ago by mbkuhn
  0

• Spurious currents created across coarse-fine boundary from hydrostatic pressure near air-water interface

  #1200 opened 2 months ago by mbkuhn
  4

• Add time-vary & spatially varying body force for MMC simulations

  #1058 opened 22 days ago by lawrenceccheung
  15

• Assertion `npts == (nrotor_pts + fi.num_pts_tower)' failed.

  #1229 opened 25 days ago by CaiZhiming-HHU
  1

• Feature request: ABL statistics on level >0

  #1041 opened 5 months ago by rthedin
  7

• "Compilation error in v3.0.1."

  #1231 opened a month ago by hamidMech
  3

• Actuator source term for wing simulation is only partially applied depending on number of MPI ranks

  #1217 opened a month ago by ET14
  3

• Assertion `npts == (nrotor_pts + fi.num_pts_tower)' failed.

  #1227 opened a month ago by CaiZhiming-HHU
  0

• Sampling Warning

  #1191 opened a month ago by hgopalan
  2

• Out-of-memory crash with large sampling

  #1186 opened 2 months ago by rthedin
  14

• Time-varying boundary conditions (velocity and surface temperature) for precursor simulations

  #1138 opened 3 months ago by udhaya-chandiran
  5

• Failing abl_multiphase_laminar test

  #1162 opened 2 months ago by marchdf
  0

• Sampling resolved TKE on a plane

  #1127 opened 2 months ago by delloiaconobenito
  10

• ow_w2a test is non deterministic on CPU

  #1090 opened 2 months ago by marchdf
  2

• PlaneSampler skipping `normal` unless `offsets` is specified

  #1132 opened 3 months ago by rthedin
  8

• Potential unidentified bug causes an asymmetry in the solution field

  #1126 opened 3 months ago by mukul1992
  4

• I encountered the following problems in the process of learning to use TurbineFASTLine. Is this due to the version of TurbineFastline

  #1088 opened 3 months ago by Chengyue810
  5

• Poor performance of amr-wind

  #1097 opened 3 months ago by Armin-Ha
  14

• Unable to represent more than one Box type with the Immersed Boundary method

  #1117 opened 3 months ago by delloiaconobenito
  2

• Calculation of flow field in complex terrain

  #1114 opened 3 months ago by CaiZhiming-HHU
  6

• Representing an obstacle through a local transition in surface roughness

  #1110 opened 3 months ago by delloiaconobenito
  5

• trouble in simulations results and some general queries

  #1103 opened 3 months ago by AsimUdel
  3

• Geostrophic Forcing flaws

  #1026 opened 3 months ago by mbkuhn
  5

• storing postprocessing files in another directory

  #1081 opened 3 months ago by AsimUdel
  0

• Excessive netCDF sampling warning

  #1104 opened 3 months ago by rybchuk
  2

• MAC velocity not getting filled correctly at the low boundary

  #1076 opened 4 months ago by mukul1992
  18

• Instability in some simulation

  #1080 opened 4 months ago by AsimUdel
  10

• Segmentation fault when running more than one turbine

  #1068 opened 4 months ago by justhawk98
  11

• MMC forcing fails with GPU

  #1057 opened 4 months ago by lawrenceccheung
  3

• Segfault of AMR-Wind + OpenFAST with oneapi

  #1048 opened 4 months ago by marchdf
  2

• Encountered NetCDF error; aborting

  #1071 opened 4 months ago by AsimUdel
  6

• FLLC Reintroduced bug

  #1038 opened 4 months ago by tonyinme
  1

• GPU Unit test Failues: DiagnosticsTest.Max_Vel_MultiLevel and Max_MACvel_MultiLevel

  #1063 opened 5 months ago by moprak-nrel
  1

• Segfaults on initial MAC projection

  #1008 opened 5 months ago by gyalla
  24

• Sampling derived fields

  #999 opened 5 months ago by tonyinme
  2

• Underestimated power predictions from OpenFAST/ALM turbine models in unsteady flows

  #1009 opened 5 months ago by lawrenceccheung
  48

• Enable changing velocity in turbine simulations from precurors

  #1022 opened 5 months ago by genevievestarke
  9

• Refinement of 2D airfoil simulations

  #994 opened 5 months ago by ET14
  6

• Warning while running (fastdisk/fastline) actuator method in AMR-Wind

  #995 opened 5 months ago by AsimUdel
  7

• Error (Tower strike)

  #1001 opened 5 months ago by AsimUdel
  2

• Cannot find field: tke

  #1023 opened 5 months ago by AsimUdel
  2

• Unable to see variable in (Netcdf file)

  #991 opened 6 months ago by AsimUdel
  8

• Mesh refinement near domain edge causes seg fault

  #988 opened 6 months ago by rybchuk
  3

• Averaging (Post Processing AMR Wind)

  #1013 opened 6 months ago by AsimUdel
  3

• Discussion Question: Forested Areas and Terrain - Drag Based Models

  #1002 opened 6 months ago by hgopalan
  2

• Virtual lidar test failing

  #998 opened 6 months ago by tonyinme
  1