Custom KiCad Libraries
Custom KiCad components used in my projects.
Examples
General Symbols and Footprints
PJ-311D SMD 3.5mm Headphones Jack
![PJ-311D](https://raw.githubusercontent.com/4x5dm/kicad_libraries/master/docs/images/datasheets/Jack PJ-311D.jpg)
Since April 11, 2017 this footprint is available in official KiCad Connectors.pretty library.
PJ-31060 SMD 3.5mm Headphones Jack
![PJ-31060](https://raw.githubusercontent.com/4x5dm/kicad_libraries/master/docs/images/datasheets/Jack PJ-31060.jpg)
Since April 11, 2017 this footprint is available in official KiCad Connectors.pretty library.
SPDT Slide Switch
The footprint is designed for 0.8x0.45mm pins.
PJ-320E Through Hole 3.5mm Headphones Jack With Microphone
Since April 11, 2017 this footprint is available in official KiCad Connectors.pretty library.
PJ-320D/DS SMD 3.5mm Headphones Jack With Microphone
Since April 11, 2017 this footprint is available in official KiCad Connectors.pretty library.
3.5mm Headphones Jack With Microphone, 4 pins, 6 contacts
Microampermeter For PCB Mounting
Tuning meter from an old radio receiver which I used in my QRP SWR Meter project.
Mini USB Connectors
Mini-DIN 6 Pin Connector
Philmore 30-20001 SPDT Switch
Cliff UT1x SPDT Switch
Seiko MS621FE-FL11E Backup Battery
GPS Modules
GlobalTop Gms-g9 GNSS Module
Quectel L80 GPS Module
Components Library Installation
- Download the custom_kicad_symbols folder to your computer.
- Open Eeschema editor.
- Go to
Preferences
menu and selectComponent Libraries
.
4. In the window which will be opened click
Add
button and select the library you saved.
Footprints Library Installation
- Download the custom_kicad_footprints.pretty folder to your computer. Each file in this folder represents a footprint.
- Open KiCad PCB editor.
- Go to
Preferences
menu and selectFootprint Libraries Manager
.
4. In the wizard window which will be opened select
Files on my computer
option and click Next
.
5. Find the downloaded folder and click
Next
.
6. You'll see the properties of the new library. If all is OK, click
Next
.
7. Select required library viibility and click
Finish
.
Questions? Suggestions?
You are more than welcome to contact me with any questions, suggestions or propositions regarding this project. You can:
- Visit my QRZ.COM page
- Visit my Facebook profile
- Write me an email to iosaaris =at= gmail dot com