/kicad-libraries

KiCad libraries for Espressif chips and modules

OtherNOASSERTION

Espressif KiCad Library

This repository contains the Symbols, Footprint, and 3D Models for the Espressif SoC and Modules family.

Library Downloads

Notice: The libraries are provided in the hope that they will be useful but without a warranty of any kind.

The libraries in this repository are intended to be used with KiCad version 6.

Each footprint library is stored as a directory with the .pretty suffix. The footprint files are .kicad_mod files within.

Hardware Design Guidelines

Before designing your own hardware, be sure to check all recommendations at:

Espressif Hardware Design Guidelines

Symbols and Footprints

All footprints were designed according to the Recommended PCB Land Pattern section present on each module datasheet.

SoC

The following SoC are included in this library

SoC Symbol Footprint Resource
ESP32 Yes No Datasheet
ESP32-C3 Yes No Datasheet
ESP32-PICO-V3 Yes No Datasheet
ESP32-S2 Yes No Datasheet
ESP32-S3 Yes No Datasheet
ESP8286 Yes No Datasheet
ESP8285 Yes No Datasheet

Modules

Module Symbol Footprint Resource
ESP32-C3-MINI-1 Yes Yes Datasheet
ESP32-C3-WROOM-02 Yes Yes Datasheet
ESP32-S2-MINI-1 Yes Yes Datasheet
ESP32-S2-MINI-1U Yes Yes Datasheet
ESP32-S2-SOLO Yes Yes Datasheet
ESP32-S2-WROOM Yes Yes Datasheet
ESP32-S2-WROVER Yes Yes Datasheet
ESP32-S3-MINI-1 Yes Yes Datasheet
ESP32-S3-MINI-1U Yes Yes Datasheet
ESP32-S3-WROOM-1 Yes Yes Datasheet
ESP32-S3-WROOM-1U Yes Yes Datasheet
ESP32-WROOM-32E Yes Yes Datasheet
ESP32-WROOM-32UE Yes Yes Datasheet
ESP32-WROVER-E Yes Yes Datasheet

Development Boards

Dev Board Symbol Footprint Resource
ESP32-S2-Saola-1 Yes Yes Schematic
ESP32-DevKitC Yes Yes Schematic
ESP32-S3-DevKitC Yes Yes
ESP32-S2-DevKitM Yes Yes Schematic

Contributing

If you want to contribute, please consider sending us a Pull Request (PR).

3D Models

Espressif provides some 3D models to help you with your project inside the 3d folder. To use the files, you need to create an environment variable add the 3d folder path.

  • Open Open Preferences -> Configure Paths...
  • Create the new variable:
    • Name: ESPRESSIF_3DMODELS
    • Path: <PATH_TO_THE_3D_FOLDER>

About KiCad

KiCad is a Cross-Platform and Open Source Electronics Design Automation Suite. See KiCad EDA for more information.