/Micron

GNU General Public License v3.0GPL-3.0

Micron

Rendering of a Micron build

The official Micron BOM is here.

If you want to purchase full kits there are 2 available

Funssor Micron (120x120) Kit (Affiliate Link)

Funssor Micron+ (180x180) Kit (Affiliate Link)

120x120 build

Frame Extrusions

Misumi Part # Qty Notes
HFS3-1515-300 4 Blind holes need to be drilled
HFS3-1515-220 10 Ends need to be tapped (M3)
HFS3-1515-205 2
HFS3-1515-190 1
HFS3-1515-125 1

Linear Rails

Part Qty Length
MGN7H 6 150mm
MGN9C OR MGN9H 1 150mm
180x180 build

Frame Extrusions

Misumi Part # Qty Notes
HFS3-1515-350 4 Blind holes need to be drilled
HFS3-1515-280 10 Ends need to be tapped (M3)
HFS3-1515-265 2
HFS3-1515-250 1
HFS3-1515-180 1

Linear Rails

Part Qty Length
MGN7H 6 220mm
MGN9C OR MGN9H 1 220mm

No Drop Nuts

There are 2 versions of this mod, 1 from Zruncho and the other from a user named Zen3D. Both of them have their uses. I prefer to use the Zen3D kind just for the fact that the screw can go all the way through the printed part. Zrunchos do have a much nicer fitment into the extrusions but they also dont allow the screw to go all the way through.

Thank you

Thanks to the following people on Discord who have helped get this printer finished:

  • @TheWarolf#1247
  • @L.e.o.p.a.r.d#0990
  • @deepfriedheroin#5006
  • @JosAr#0517
  • @sentein#3903
  • @madcat#7838
  • @Kyrios#5486
  • @faithblinded#1491
  • @zruncho#1790
  • @Finn#2449
  • @clee#1337
  • @slidr#4412
  • @gfunnymoney#3748
  • Jason from LDO
  • Voron Dev Team

You can support the Micron project on Patreon.

Based on the Voron Design 2.4