Trident 9mm belts
100% in testing use at your own risk. I made all the edits multiple times to make all the versions of parts. Like the Y endstop and pinned versions. I am postive there are mistakes or errors. If you find an issues let me know so I can get it corrected. Thanks and I hope you enjoy it.
Changes: added cad for embedded y endstops in a motor upper 11/15/22
updated almost all parts for addtional clearances, Changed 36 mm pin to 35 mm pin. 11/16/22
All versions have y endstop a drives now
Added 2.4 pinned and unpinned versions
renamed page to reflect it is not just trident
added cw1 and cw2 carriages
11-19-22
Updated XY joints for addtional clearances.
AB pin added more space for easiers slotting of pins.
11/23/22
AB Drives
| Count | Size | Notes |
|---|---|---|
| 2 | BHCS 14mm m5 | |
| 15 | BHCS 12mm m5 | extrustion connection points |
| 1 | SHCS 12mm m3 | lower rear a gantry arm |
| 6 | SHCS 35 mm m3 | screws motors |
| 2 | 9mm gt2 idlers |
Idlers
| Count | Size | Notes |
|---|---|---|
| 8 | BHCS 12mm m5 |
XY joints (All screws from bottom remain unchanged)
| Count | Size | Notes |
|---|---|---|
| 4 | BHCS m5 x 12 mm | extrusion |
| 2 | BHCS m5 x 18mm | for extrusion if you use x chain mounts |
| 4 | SHCS m5 x 45mm |
Pins
| Count | Size | Notes |
|---|---|---|
| 2 | 35mm | AB motor mounts |
| 6 | 25mm | 2 for AB motor 4 for xy joints |
| 2 | 45mm | Idlers |
If not using pins
| Count | Size |
|---|---|
| 4 | SHCS m5 x 35mm |
| 6 | SHCS m5 x 45mm |
| 2 | SHCS m5 x 40mm |
Bearings
| Count | Size |
|---|---|
| 24 | F695 |
| 12 | 695 |
Need an Addtional (8)m5x16 for belt clamps on 2.4