FYSETC/FYSETC-E4

Issues

• Download mode not active

  #51 opened 2 years ago by leviner18
  4

• TMC2209 UART driver error

  #56 opened a year ago by yoroboticscolombia
  1

• Wrong Rsense value on the schematic

  #49 opened 2 years ago by kdomanski
  1

• Support to LCD module?

  #53 opened a year ago by RaulTrombin
  14

• Fix for WiFiClient library compilation fails again!

  #42 opened 2 years ago by umartechboy
  3

• XYYZ machine. How to do it on E4?

  #55 opened a year ago by IgorPack
  0

• BL_Touch use, it's possible?

  #52 opened a year ago by RaulTrombin
  0

• SD Card Not Detecting

  #37 opened 2 years ago by lancesand
  2

• How to unbrick board after failed firmware update?

  #50 opened 2 years ago by mherfurt
  0

• Use TB for Filament Runout.

  #48 opened 2 years ago by supernacheitor
  0

• Update firmware.

  #47 opened 2 years ago by supernacheitor
  1

• Failed to build firmware on latest PlatformIO

  #40 opened 2 years ago by 25879
  9

• can't compile with new Platformio

  #45 opened 2 years ago by 4kardes
  2

• How To Correctly Set The Motor Current Limit on board?

  #41 opened 2 years ago by 12520349
  3

• pls help there is no wifi (or IP adress) anymore

  #46 opened 2 years ago by 4kardes
  0

• Klipper Support for E4 boar

  #18 opened 3 years ago by IXMAN89
  1

• How to connect a bltouch with solution

  #16 opened 3 years ago by lols
  0

• Does anyone have schematic of board ?

  #39 opened 2 years ago by 12520349
  1

• can't connect to webui when switch to STA mode

  #38 opened 2 years ago by tramnon
  0

• Fix the bottom silkscreen

  #17 opened 3 years ago by lols
  1

• E4 Web interface: How to show bed temperature?

  #35 opened 3 years ago by Reefeiro
  1

• 'class CardReader' has no member named 'diskIODriver'

  #25 opened 3 years ago by brunoeiti
  2

• default password

  #32 opened 3 years ago by xrenznaet
  0

• No Wi-Fi after Marlin update

  #27 opened 3 years ago by Vassssko
  0

• Feature request for E4 V1.1

  #26 opened 3 years ago by walemke
  0

• Fan always on

  #8 opened 4 years ago by sdavidozzo
  10

• PIN Numbers please

  #11 opened 4 years ago by smashemQuads
  2

• Servo Usage, which pin is accessible?

  #12 opened 4 years ago by theomega
  2

• Print pauses and leaves blobs

  #13 opened 4 years ago by Tigger777
  0

• Config marlin

  #10 opened 4 years ago by smashemQuads
  2

• FYSETC-E4 Setup Example For a Delta Printer

  #1 opened 4 years ago by Loadmaster1
  5