Spider v2.3; USB problems; no MCU id.
Fickert07 opened this issue · 2 comments
Fickert07 commented
Able to flash bootloader and firmware via USB with STM32 Programmer, additionally able to flash firmware Via SD (confirmed with old.bin file on sd card after install), but Pi does not detect a USB change with sudo dmesg when I unplug and plug back in the board.
Pi is not the issue as it is detecting multiple Webcams via USB.
Not sure where to go from here other than order a new board. Frustrating as I purchased a year ago, but was never taken out of the plastic.
Any tips I will be greatful.
Fickert07 commented
Also to add, firmware compiled was using USB not serial or CAN.
zhujue888 commented
看来没有得到任何回复。