Adapter for an external CC1101 module for the Flipper Zero
- Solder on 90° Pin headers to connect to the flipper.
- Solder on a 2x4 pin header onto your CC1101 Module
- Solder on a 470 Ohm resistor and LED (optional)
- Solder on a AMS1117 5V to 3.3V DC to DC step down converter.
- Solder on a capacitor (probably optional)
- Solder the C1101 Module onto this board. (Pin 1 is GND)
- Install Flipper firmware that is capable of using the CC1101 Module (Unleashed or RogueMaster)
- Hack the planet