/j5_components_exp

[Arduino + J5] First try with arduino components running through johnny-five framework

Primary LanguageJavaScript

[Arduino + J5] Arduino components experimentation with Javascript's Johnny-five library https://github.com/rwaldron/johnny-five. Examples were highly based on J5's samples.

##Components:

  • 16x2 LCD Display: Text display to output messages;
  • Ultrasonic Distance Sensor: Distance-aware device;
  • 9g TowerPro SG90 Micro Servo: Angled or linear position motor;
  • NTC Temperature Sensor: Tempareature-aware device;
  • LDR Light Sensor (Photoresistor): Light-aware device;
  • Tilt Vibration Sensor: Orientation-aware device;
  • Passive Buzzer (piezo): Sound emitter;
  • Green and Red LEDs: Light components;
  • RGB LED: Light component with color and brightness control;
  • 10KΩ Trimpot Potentiometer: adjustable resistor control;
  • Push-button Switch: 2 position state switch;
  • 3-way Switch: 3 position state switch;

##Auxiliary components:

  • Uno R3 Board
  • USB Cable
  • 830 Point Protoboard
  • Male-male Jumper Wires
  • 40 Pin Bar
  • Ceramic Capacitors (10nF, 100nF)
  • Electrolytic Capacitors (100uF)
  • Resistors (330Ω, 1KΩ, 10KΩ)

###Status:

  • Pending
  • Done