The Pico server code may be viewed here.
You may download the .uf2 file here.
The following functionality is implemented in this release:
- Analog Input
- Digital Input, Digital Input Pullup, Digital Input Pulldown
- PWM output
- Loopback (for client/server link debugging)
- I2C Support
- SPI Support
- NeoPixel Support
- Servo Support
- HC-SR04 Type Sonar Distance Sensor Support
- DHT 11 and 22 Humidity/Temperature Sensor Support
- Autodetect PICO device over USB Serial.
- Automatic board reset of the PICO using the watchdog timer when application exits.
- Board will blink twice upon reset.
- Retrieval of the PICO's unique ID.
The Telemetrix4RpiPico server, in conjunction with its client peer, allows you to control a Raspberry Pi Pico remotely from your PC. A complete User's Guide is available describing how to install and use both the server and client.
To install the server, follow these installation instructions.