Flowgrind - TCP traffic generator
Flowgrind is an advanced TCP traffic generator for testing and benchmarking Linux, FreeBSD, and Mac OS X TCP/IP stacks. In contrast to similar tools like iperf or netperf it features a distributed architecture, where throughput and other metrics are measured between arbitrary flowgrind server processes.
- Website: flowgrind.github.io
- Issues: GitHub Issues
- API documentation: Doxygen
What It Can Do?
Flowgrind measures besides goodput (throughput), the application layer interarrival time (IAT) and round-trip time (RTT), blockcount and network transactions/s. Unlike most cross-platform testing tools, flowgrind can output some transport layer information, which are usually internal to the TCP/IP stack. For example, on Linux and FreeBSD this includes among others the kernel's estimation of the end-to-end RTT, the size of the TCP congestion window (CWND) and slow start threshold (SSTHRESH).
Flowgrind has a distributed architecture. It is split into two components: the flowgrind daemon and the flowgrind controller. Using the controller, flows between any two systems running the flowgrind daemon can be setup (third party tests). At regular intervals during the test the controller collects and displays the measured results from the daemons. It can run multiple flows at once with the same or different settings and individually schedule every one. Test and control connection can optionally be diverted to different interfaces.
The traffic generation itself is either bulk transfer, rate-limited, or sophisticated request/response tests. Flowgrind uses libpcap to automatically dump traffic for qualitative analysis.
Building flowgrind
Flowgrind builds cleanly on Linux, FreeBSD, and Mac OS X. Other operating systems are currently not planned to be supported. Flowgrind expects libxmlrpc-c
and OSSP uuid
to be available. Additionally, for the optional advanced traffic generation and automatic dump support libgsl
an libpcap
should be installed.
Flowgrind is built using GNU autotools on all supported platforms. You can build it using the following commands:
# cd flowgrind
# autoreconf -i
# ./configure
# make
For more information see INSTALL.md.
Instructions to run a test
- Start
flowgrindd
on all machines that should be the endpoint of a flow. - Execute
flowgrind
on some machine (not necessarily one of the endpoints) with the host names of the endpoints passed through the -H option.
Assume we have 4 machines, host0, host1, host2 and host3 and flowgrind has been installed on all of them. We want to measure flows from host1 to host2 and from host1 to host3 in parallel, controlled from host0. First, we start flowgrindd
on host1 to host3. On host0 we execute:
# flowgrind -n 2 -F 0 -H s=host1,d=host2 -F 1 -H s=host1,d=host3
In order to not influence the test connection with control traffic, flowgrind allows to setup the RPC control connection over a different interface. A typical scenario would be to test a WiFi connection and run the control traffic over a wired connection.
Assume two machines running flowgrindd
, each having two network adapters, one wired, one wireless. We run flowgrind
on a machine that is connected by wire to the test machines. First machine has addresses 10.0.0.1 and 192.168.0.1, the other has addresses 10.0.0.2 and 192.168.0.1. So our host argument will be this:
# flowgrind -H s=192.168.0.1/10.0.0.1,d=192.168.0.2/10.0.0.2
In words: test from 192.168.0.1 to 192.168.0.2 on the nodes identified by 10.0.0.1 and 10.0.0.2 respectively.
See also
There are other popular TCP measurement tools you might look into, especially if you are mainly interested in fast unidirectional bulk transfer performance.