Pinned Repositories
knot-cloud-source
meshblu clone
knot-gateway-buildroot
KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.
knot-gateway-webui
Repository for the Web User Interface to the KNoT Gateway based on angular and bootstrap
knot-hal-source
KNOT HAL is part of KNOT project. It aims to provide hardware abstraction layer for SPI and nRF24L01 radios. Allowing power constrained embedded devices to join a wireless network and exchange datagrams using nRF24L01 radios. The initial target platforms are Arduino (nodes), and Raspiberry PI GW. nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band. On a second project phase, other radio access technologies such as Bluetooth Low Energy, and Wi-Fi are planned.
knot-protocol-source
KNOT protocol library is a lightweight C library built to use minimal CPU and memory resources.
knot-service-source
KNoT Service is part of KNoT project. It aims to provide a "proxy" service between KNoT Things and KNoT Cloud, allowing power constrained embedded device to interact with cloud services. The initial target platform are PAN devices, and Raspberry Pi GW. The PAN device used is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band (NRF24L01). On a second project phase, other radio access technologies such as LPWAN devices, Mesh devices, 3G Devices, Bluetooth Low Energy Devices, and Wi-Fi Devices are planned.
knot-thing-source
KNOT Thing is part of KNOT project. It aims to provide abstractions for power constrained embedded devices to implement sensors and libraries to hide nRF24L01 low level operations. The initial target platform is Arduino (aka KNOT nodes).
knot-gateway-buildroot
KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.
knot-cloud-source
KNoT Cloud (Legacy - please use CESARBR/knot-cloud)
knot-gateway-webui
Repository for the Web User Interface to the KNoT Gateway based on angular and bootstrap
FlavioCastroFilho's Repositories
FlavioCastroFilho/knot-gateway-webui
Repository for the Web User Interface to the KNoT Gateway based on angular and bootstrap
FlavioCastroFilho/knot-gateway-buildroot
KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.
FlavioCastroFilho/knot-hal-source
KNOT HAL is part of KNOT project. It aims to provide hardware abstraction layer for SPI and nRF24L01 radios. Allowing power constrained embedded devices to join a wireless network and exchange datagrams using nRF24L01 radios. The initial target platforms are Arduino (nodes), and Raspiberry PI GW. nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band. On a second project phase, other radio access technologies such as Bluetooth Low Energy, and Wi-Fi are planned.
FlavioCastroFilho/knot-service-source
KNoT Service is part of KNoT project. It aims to provide a "proxy" service between KNoT Things and KNoT Cloud, allowing power constrained embedded device to interact with cloud services. The initial target platform are PAN devices, and Raspberry Pi GW. The PAN device used is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band (NRF24L01). On a second project phase, other radio access technologies such as LPWAN devices, Mesh devices, 3G Devices, Bluetooth Low Energy Devices, and Wi-Fi Devices are planned.
FlavioCastroFilho/knot-cloud-source
meshblu clone
FlavioCastroFilho/knot-protocol-source
KNOT protocol library is a lightweight C library built to use minimal CPU and memory resources.
FlavioCastroFilho/knot-thing-source
KNOT Thing is part of KNOT project. It aims to provide abstractions for power constrained embedded devices to implement sensors and libraries to hide nRF24L01 low level operations. The initial target platform is Arduino (aka KNOT nodes).