/Convergence

Primary LanguageC++

Convergence

AlphaPix Setup

  1. Connect the AlphaPix to your computer via an ethernet cable. (The AlphaPix has a default network IP address of 192.168.0.50)
  2. Configure your ethernet to use a unique static IP address (ie 192.168.0.1)
  3. Make sure your computer’s wifi is turned off
  4. That's it, now just run the software!

Program settings:

Three AlphaPix set to: A - 192.168.0.51 B - 192.168.0.52 C - 192.168.0.53

DMX Signal Protocol Config - ArtNet Pixel Chip Color Order - GRB

##TODO