Note

This is an unofficial port of Gordon's wiringPi library. Please do not email Gordon if you have issues, he will not be able to help.

wiringOP for Python

wiringOP: An implementation of most of the Arduino Wiring functions for the Orange Pi.

Manual Build

Get/setup repo

git clone https://github.com/orangepi-xunlong/wiringOP-Python.git
cd wiringOP-Python

Prerequisites

To rebuild the bindings you must first have installed swig, python-dev, and python-setuptools (or their python3- equivalents). wiringOP should also be installed system-wide for access to the gpio tool.

sudo apt-get install python-dev python-setuptools swig python-pip

Build & install with

sudo python setup.py install

Or Python 3:

sudo python3 setup.py install

Usage

import wiringpi

# One of the following MUST be called before using IO functions:
wiringpi.wiringPiSetup()      # For sequential pin numbering

General IO:

wiringpi.pinMode(6, 1)       # Set pin 6 to 1 ( OUTPUT )
wiringpi.digitalWrite(6, 1)  # Write 1 ( HIGH ) to pin 6
wiringpi.digitalRead(6)      # Read pin 6