FlyingLotus1983/arduino-modbus-slave

Issues

• Uncommon serial setup

  #1 opened 9 years ago by GoogleCodeExporter
  0

• If communicating with Mach3 CNC software and write to multiple Analog Outputs reg. cant get respons from library

  #2 opened 9 years ago by GoogleCodeExporter
  1

• Trouble serving registers

  #3 opened 9 years ago by GoogleCodeExporter
  0

• Baud rate intermessage timing issue and coil/digital register problem.

  #4 opened 9 years ago by GoogleCodeExporter
  1

• Slave hangs after some modbus scans.

  #5 opened 9 years ago by GoogleCodeExporter
  0