FreeJoy-Team/FreeJoyConfigurator

Issues

• I cant write config to bluepill

  #34 opened 5 months ago by DrakeN-vs
  0

• USB force feedback on stm32f103c8t6?

  #7 opened 5 years ago by tistructor
  2

• Possible conflict

  #29 opened 4 years ago by evolution808
  3

• The configuration program cannot be opened with the device plugged in

  #33 opened 2 years ago by claraqwq
  0

• Windows can't see buttons

  #32 opened 3 years ago by isawben
  0

• Can't Read/Write Config from/to Device

  #31 opened 4 years ago by ethan54013
  5

• Cannot Set The Toggle Press Time plus Diode Question

  #30 opened 4 years ago by speedbird5
  17

• Physical pins config and buttons

  #28 opened 4 years ago by geologic
  2

• why can't setup?

  #25 opened 4 years ago by liyayo0927
  3

• The name in game controller is not change

  #27 opened 4 years ago by liyayo0927
  2

• Issue sharing latches on 4 shift chains

  #24 opened 4 years ago by nflaum
  3

• Shift[2-5] count physical buttons?

  #23 opened 4 years ago by yogggoy
  3

• how to config IIC pins for ADS1115? I cant find the pins with configurator V1.6.2b1

  #22 opened 4 years ago by piogrammer
  1

• Adding option of UART at PA9 & PA10?

  #21 opened 4 years ago by disablewong
  1

• RKJXT1F42001

  #20 opened 4 years ago by memob777
  2

• The shift register LATCH/DATA pin is confusing

  #5 opened 4 years ago by jieweiyang
  2

• How to deactivate AXES I dont plan to use on my project?

  #19 opened 4 years ago by memob777
  7

• stm not detected when connected on microusb

  #18 opened 4 years ago by victorrun
  2

• Axis to 16 Buttons would be nice to encode a 16 Button resistance matrix

  #17 opened 4 years ago by bayerla
  3

• Three position toggles, ON-OFF-ON

  #16 opened 5 years ago by snakepl88
  3

• How do I run the FreeJoyConfigurator?

  #6 opened 5 years ago by tistructor
  34

• Trouble reading/writing config

  #11 opened 5 years ago by Gaskrank
  5

• Virtual (OFF LOGIC) button press from two actual inputs?

  #12 opened 5 years ago by TomHVR
  1

• Can't save

  #2 opened 5 years ago by mahdiyari
  16

• Chinese support required

  #4 opened 5 years ago by hde610
  2

• When ButtonVcc - no Button Config for it

  #3 opened 5 years ago by godor2008
  3