iHealth Device Developer

Latest version: 2.1

Documnentation

This document describes how to use the iHealth Device SDK to accomplish the major operation: Connection Device, Online Measurement, Offline Measurement and iHealth Device Management.

Authentication

If you want to use the iHealth Device, you must first call authentication method, can call after certification by iHealth relevant methods of the device.

Authentication method：

-(void)commandSDKUserValidation:(HealthUser *)tempUser UserDeviceAccess:(DisposeSDKUserDeviceAccess)userDeviceAccess UserValidationSuccess:(DisposeSDKUserValidationSuccess)userValidationSuccess UserValidationReturn:(DisposeSDKUserValidationReturn)userValidationReturn DisposeErrorBlock:(DisposeSDKUserValidationErrorBlock)disposeValidationErrorBlock

Support iHealth Device for iOS

BP: 
iHealth BP3    iHealth BP3L  iHealth BP5  iHealth BP5S   iHealth BP7   iHealth BP7S   iHealth Continua BP iHealth KN550BT     iHealth ABI    iHealth ABPM   

HS: 
iHealth HS3    iHealth HS4   iHealth HS4S(Same with HS4)   iHealth HS5  iHealth HS6 

AM: 
iHealth AM3    iHealth AM3S   iHealth AM4  
     
BG: 
iHealth BG1    iHealth BG3  iHealth BG5  iHealth BG5L    

PO: 
iHealth PO3

Support Update iHealth Device for iOS

AM3 AM3S AM4 HS4 HS4S BP5S ABPM

Relevant files and frameworks

1、Import the following iHealthSDK files：

BP: 
BPHeader.h、 BPMacroFile.h、BPCommandCache.h、BPController.h、BPDevice.h、 BP3.h、 BP3Controller.h、BP3L.h、 BP3LController.h、 BP5.h、BP5Controller.h、BP5S.h、BP5SController.h、 BP7.h、 BP7Controller.h、BP7S.h、BP7SController.h、 ABI.h, ABIController.h、BPContinua.h、BPContinuaController.h、ABPM.h、ABPMController.h、KN550BT.h、KN550BTController.h  


HS: 
HSHeader.h、HSMacroFile.h、HS3.h、HS3Controller.h、HS4.h、HS4Controller.h、 HS5.h、HS5Controller.h、iHealthHS6.h

AM: 
AMHeader.h、AMMacroFile.h、AM3.h、 AM3Controller.h、AM3S_V2.h、AM3SController_V2、AM4.h、AM4Controller.h、

PO: 
POHeader.h、POMacroFile.h、PO3.h、PO3Controller.h

BG: 
BGHeader.h、BGMacroFile.h、BGCommandCache.h、BGController.h、BGDevice.h、BG5.h、BG5Controller.h、BG1.h、BG1Controller.h、BG3.h、BG3Controller.h、BG5L.h、BG5LController.h

Common: 
HealthUser.h、ConnectDeviceController.h、ScanDeviceController.h、HealthHeader.h

Update：

SDKUpdateDevice.h

Authentication：
 
IHSDKCloudUser.h

Library: iHealthSDK2.1.a

supports iOS 8.0 and above.

2、Frameworks

3、Configuration

Add 2 new Item in ‘Supported external accessory protocols’: com.jiuan.BPV20, com.jiuan.P930, com.jiuan.BPV21,com.jiuan.BGV30,com.jiuan.BGV31,com.ihealth.sc221

Add 1 new Item in ‘Required background modes’: App communicates with an accessory、 App communicates using CoreBluetooth

How to apply for SDK permissions

Click this link

How to use the iHealth SDK

Operation procedure for BP3.

Reference BP5

Operation procedure for BP5.

a) Register plug-in device info: BP5ConnectNoti;

b) Initialize controller classes:

shareBP5Controller];```

c) Access control class instance after receive `BP5ConnectNoti`: 

```NSArray *bpDeviceArray = [controller

getAllCurrentBP5Instace];```

``` BP5 *bpInstance = [bpDeviceArray objectAtIndex: i];```

d) Using ‘bpInstance’ call communication module of the device

Operation procedure for BP7.

Reference BP5

Operation procedure for ABI.

For ABI Mesure(both arm and leg)

a) Register plug-in device info: ABIConnectNoti; b) Initializedcontrollerclass:

   shareABIController];```

c) Access controller class instance after receive `ABIConnectNoti`:

```ABI *bpInstance = [controller getCurrentABIInstace];```

d) Using ‘bpInstance’ call communication module of the device.



For Arm Mesure(arm only)

a) Register plug-in device info: `ArmConnectNoti`; 

b) Initializedcontrollerclass:

```ABIController *controller = [ABIController
       shareABIController];```

c) Access controller class instance after receive ArmConnectNoti:

```ABI *bpInstance = [controller getCurrentArmInstance];```

d) Using ‘bpInstance’ call communication module of the device.

Operation procedure for BP3L.

a) Register plug-in device info: BP3LDiscover;

b) Start scan BP3L

[[ScanDeviceController commandGetInstance]commandScanDeviceType:HealthDeviceType_BP3L]

c) Register plug-in device info: BP3LConnectFailed、BP3LConnectNoti、 BP3LDisConnectNoti;

d) Connect BP3L after receive BP3LDiscover

[[ScanDeviceController commandGetInstance]commandStopScanDeviceType:HealthDeviceType_BP3L]

[[ConnectDeviceController commandGetInstance]commandContectDeviceWithDeviceType:HealthDeviceType_BP3L andSerialNub:serialNub]

e) Access control class instance after receive BP3LConnectNoti:

shareBP3LController]; NSArray *bpDeviceArray = [controller getAllCurrentBP3LInstace]; ```

```BP3L *bpInstance = [bpDeviceArray objectAtIndex: i];```

f) Using ‘bpInstance’ call communication module of the device

Operation procedure for BP7S、KN550BT、KD926、

Reference BP3L
Operation procedure for HS3.

Reference BP5
Operation procedure for HS4.

Reference BP3L
Operation procedure for HS5.

Reference BP5
Operation procedure for AM3.

```Reference BP3L```

Operation procedure for AM3S.

```Reference BP3L```

Operation procedure for AM4.

```Reference BP3L```

Operation procedure for PO3.

```Reference BP3L```

Operation procedure for BG1.

a) Initialization for BG1 (connected BG via sound jack)

   ```[[BG1Controller shareBG1Controller]initBGAudioModule];```

b) Access control class instance after receive BG1ConnectNoti: BG1 *bgInstance = [[BG1Controller shareBG1Controller] getCurrentBG1Instance];

c) Using ‘bgInstance’ to call the connection and BG test module of the device. BG test function must be called after the block of connection return.

Operation procedure for BG5.

```Reference BP5```

BP Device change mothod

Version Migration Guide For BP series API

1.Measurment

BP3

OLD:

-(void)commandStartMeasureWithUser:(NSString *)userID clientID:(NSString *)clientID clientSecret:(NSString *)clientSecret Authentication:(BlockUserAuthentication)disposeAuthenticationBlock pressure:(BlockPressure)pressure xiaoboWithHeart:(BlockXioaboWithHeart)xiaobo xiaoboNoHeart:(BlockXioaboNoHeart)xiaoboNoHeart  result:(BlockMesureResult)result errorBlock:(BlockError)error;

NEW:

-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat result:(BlockMeasureResult)result errorBlock:(BlockError)error;

BP3L

OLD:

-(void)commandStartMeasureWithUser:(NSString *)userID clientID:(NSString *)clientID clientSecret:(NSString *)clientSecret Authentication:(BlockUserAuthentication)disposeAuthenticationBlock pressure:(BlockPressure)pressure xiaoboWithHeart:(BlockXioaboWithHeart)xiaobo xiaoboNoHeart:(BlockXioaboNoHeart)xiaoboNoHeart  result:(BlockMesureResult)result errorBlock:(BlockError)error;

NEW:

-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat  result:(BlockMeasureResult)result errorBlock:(BlockError)error;

BP5

OLD:

-(void)commandStartMeasureWithUser:(NSString *)userID clientID:(NSString *)clientID clientSecret:(NSString *)clientSecret Authentication:(BlockUserAuthentication)disposeAuthenticationBlock pressure:(BlockPressure)pressure xiaoboWithHeart:(BlockXioaboWithHeart)xiaobo xiaoboNoHeart:(BlockXioaboNoHeart)xiaoboNoHeart  result:(BlockMesureResult)result errorBlock:(BlockError)error;

NEW:

-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat result:(BlockMeasureResult)result errorBlock:(BlockError)error;

BP7

OLD:

-(void)commandStartMeasure:(BlockPressure)pressure xiaoboWithHeart:(BlockXioaboWithHeart)xiaobo xiaoboNoHeart:(BlockXioaboNoHeart)xiaoboNoHeart  result:(BlockMesureResult)result errorBlock:(BlockError)error;

NEW:

-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat result:(BlockMeasureResult)result errorBlock:(BlockError)error;

NOTE:

add ZeroingState callback, it will continuous send NO when zeroing, and when zeroing ready, it will send YES;
change wavelet name from xiaobo to wavelet
change BlockXioaboWithHeart and BlockXioaboNoHeart block type toBlockWavelet

2.Block Type

OLD:

typedef void(^BlockStopSuccess)();
typedef void(^BlockSetUnitSuccess)();
typedef void(^BlockSetAngleSuccess)();
typedef void(^BlockSetPresureTargetSuccess)();

NEW:

typedef void(^BlockSuccess)();

NOTE:

Change all success type blocks into a uniform one

API Guide

Click this link

Examples

Click this link

Release Note

Click this link

FAQ

Click this link

Frisch12/iHealthDeviceLabs-iOS

iHealth Device Developer

Latest version: 2.1

Documnentation

Authentication

Support iHealth Device for iOS

Support Update iHealth Device for iOS

Relevant files and frameworks

How to apply for SDK permissions

How to use the iHealth SDK

BP Device change mothod

Version Migration Guide For BP series API

1.Measurment

BP3

BP3L

BP5

BP7

NOTE:

2.Block Type

NOTE:

API Guide

Examples

Release Note

FAQ