Frix-x/klippain-shaketune
Klipper streamlined input shaper workflow and calibration tools
PythonGPL-3.0
Issues
- 0
Installation problem on orange pi zero 512mb
#148 opened by DmtryJS - 43
- 0
Vibration profile for 1 axis
#150 opened by KennyVB - 0
Comparing belts on printers with delta kinematics
#149 opened by teookie - 2
running Axis Map Calibration - stops with error
#146 opened by pmbroth - 2
Upgrading from verison 3.001 to version 4.1.01 causes macros to disapear from fluid macro console,
#145 opened by pmbroth - 0
- 5
axes_map determination very inconsistent
#128 opened by hapklaar - 2
- 2
- 2
unbound variable when running install.sh (python2)
#141 opened by eyenotion - 2
- 2
- 1
- 2
Out of bounds error. Error while generating the graphs: index 147 is out of bounds for axis 0 with size 125
#130 opened by kot0005 - 3
Huge variability in Belt tension results If Shake tune in run back to beak without a hard reboot.
#133 opened by kot0005 - 2
project.name contains an illegal character
#132 opened by Laikulo - 1
Add param to AXES_SHAPER_CALIBRATION for auto-saving the recommended input shapers to config
#111 opened by PhilippMolitor - 1
Dependency conflict with dangerklipper
#135 opened by Laikulo - 2
Missing macros and cfg file?
#126 opened by vagudo - 2
Using shaketune with a Beacon probe/acceleration sensor and defining axes_map
#125 opened by hapklaar - 1
Error installing
#127 opened by arsonists - 39
Random Klipper Timer too close in v4.0.0
#120 opened by Martin11180 - 6
- 11
- 1
Internal error on command:"AXES_SHAPER_CALIBRATION"
#121 opened by huskyte - 5
- 3
- 1
Allow DangerKlipper limited kinematics
#118 opened by PhilippMolitor - 14
- 1
vibrations - Error while generating the graphs
#109 opened by krautech - 2
- 1
Capitilization of recommendations change, documentation change request.
#104 opened by YesterdaysCoffee - 2
Diffrent Results between Klippers Shaper Calibration and Klippain on X Axis
#107 opened by NightHammer1000 - 4
asxl chip error running vibrations measurement
#101 opened by CD1010 - 4
Measure Fan Vibration
#85 opened by phpbbireland - 1
- 3
AXES_MAP_CALIBRATION not outputing any information
#84 opened by TekuSP - 3
Not showing *.png on interface
#97 opened by AmshaSharam - 4
Support hybrid_corexy machines
#95 opened by seacred - 1
- 5
- 3
S&T will not create the graph
#82 opened by tecno-roy - 1
accel_per_hz support
#87 opened by Chinstrap777 - 3
Error running command after update to v3
#96 opened by KazachThi - 2
Backup and Uninstall
#92 opened by Townie-au - 0
Добавить в описание по установке пункт: "Обязательно добавить секцию [resonance_tester] в printer.cfg".
#89 opened by AlatusAles - 5
- 3
AXES_SHAPER_CALIBRATION doesn't generate graph
#86 opened by Phil1988 - 4