h100
Software for the Horizon H-100 Fuel Cell Stack.
Requires PiFace Digital IO
Software required can be installed using this line:
sudo apt-get install python{,3}-pifacedigitalio python{,3}-pifacecad python-pip python-virtualenv python-smbus python-serial
Enable SPI & I2C & serial
sudo nano /etc/modprobe.d/raspi-blacklist.conf
% comment out spi & i2c lines with a '#'
sudo nano /etc/inittab
% Comment out using '#' (last line?):
#T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
sudo nano /boot/cmdline.txt
% Delete the two ttyAMA0 references to leave:
dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
The use this command to stop you needing sudo for talking to i2c devices
sudo usermod -aG i2c pi
More project information at:
and