Alternative culfw for cul devices The orginal fimware is cloned from www.culfw.de (thanks for the work to R.K.) This alternative firmware has additional send receive methods and code cleanups. The compiled firmware can be found at https://www.mediafire.com/folder/tf16radvztfd9/a-culfw Changelog: 1.05.03 - Fix timing for IT-V1 sending and receive timing for temp sensors 1.05.02 - Revert timing for Elro AB440 IT Switch changes 1.05.01 - Fix timing for Elro AB440 IT Switch - Fix size for nanoCul 1.05.00 - CULV3: add belfox (Forum #36810) - CUN*: retransmit patches from doubh (Forum #36529) - CUL: due to mem space issues: disabled by default: RF_RWE / MBUS_TX - added RF-Native Mode for RFM12 based protocols i.e. LaCrosse/IT+/PCA302, ie. use "Nr1" - add Bff to test the watchdog (Forum #36215) - CUNO2: added SOMFY RTS support to board definition (thdankert) - completed wireless m-bus RX/TX support (for T or S mode) 1.04.01 - Implement sending for HomeEasy EU protocol (command ie<value>) 1.04.00 - Implement sending for HomeEasy HE800 protocol (command ih<value>) - Receive HomeEasy protocols 1.03.04 - Reenable IT-Sending with CUL 868Mhz version - Change IT receive and sending timing to make it more stable - Cleanup code to reduce memory unsage 1.03.03 - From culfw: add Bff to test the watchdog (Forum #36215) - From culfw: CUNO2: added SOMFY RTS support to board definition (thdankert) - Fix size of 868MHz CUL (disable Hoermann, disable IT-Sending with 868Mhz version) 1.03.02 - Enable Oregon3 in CUL for testing 1.03.01 - Split CULs in 433MHz and 868MHz version - Implement Oregon 3, disabled by default. Define HAS_OREGON3 1.02.02 - completed wireless m-bus RX/TX support (for T or S mode) 1.02.00 - receive of other temperatur sensors like Rubicon and Prologue - Cleanup some code 1.01.00 - add support for intertechno v3 dimmer 1.00.01 - Bugfix in rf_receive 1.00.00 - Receive for TCM sensors like No.97001, No.212836 - Send/receive for IT Protocoll 1 and 3 - Cleanup of receive methods - Additional devices like miniCul, nanoCul, CUL-Arduino ################################################################################ # This program is free software; you can redistribute it and/or modify it under # the terms of the GNU General Public License as published by the Free Software # Foundation; either version 2 of the License, or (at your option) any later # version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. # # You should have received a copy of the GNU General Public License along with # this program; if not, write to the # Free Software Foundation, Inc., # 51 Franklin St, Fifth Floor, Boston, MA 02110, USA ################################################################################