pySDCP

Sony SDCP / PJ Talk projector control

Python 3 library to query and control Sony Projectors using SDCP (PJ Talk) protocol over IP.

##Features:

Autodiscover projector using SDAP (Simple Display Advertisement Protocol)
Query and change power status
Toggle input between HDMI-1 and HDMI-2

More features

The SDCP protocol allow to control practically everything in projector, i.e. resolution, brightness, 3d format... If you need to use more commands, just add to protocol.py, and send with my_projector.send_command

Protocol Documentation:

Link
Link

#Supported Projectors Supported Sony projectors should include:

VPL-HW65ES
VPL-VW100
VPL-VW260
VPL-VW285
VPL-VW315
VPL-VW320
VPL-VW328
VPL-VW365
VPL-VW515
VPL-VW520
VPL-VW528
VPL-VW665

Installation

pip install pySDCP

Examples

Sending any command will initiate autodiscovery of projector if none is known and will cary on the command. so just go for it and maybe you get lucky:

import pysdcp

my_projector = pysdcp.Projector()

my_projector.get_power()
my_projector.set_power(True)

Skip discovery to save time or if you know the IP of the projector

my_known_projector = pysdcp.Projector('10.1.2.3')
my_known_projector.set_HDMI_input(2)

Credits

This plugin is based on sony-sdcp-com NodeJS library by vokkim.

Galala7/pySDCP