Gameboypi/SPW

Issues

• Raspberry Pi Zero 2 W

  #60 opened 3 years ago by aethrys
  15

• How does the power switch work?

  #71 opened 6 months ago by devinstonewsu
  0

• Blank White Screen Issue

  #56 opened a year ago by Eilermoon
  11

• Zero 2 W image or manual setup guide?

  #70 opened 8 months ago by ferbeternal
  1

• creating a neat image

  #69 opened 8 months ago by Snubbletoes
  0

• PSA This project is still good to go early 2023! zero & zero2

  #65 opened 2 years ago by maarten682
  13

• Raspberry CM4

  #68 opened 10 months ago by Zach1812
  0

• Upgraded display driver

  #42 opened 4 years ago by ssjowowo
  13

• Performance and Overclocking

  #67 opened a year ago by Eilermoon
  0

• Documentation: Parts List > Gameboy sp power switch is a link for a screen

  #59 opened 3 years ago by dillanjwilding
  1

• Charging board not working

  #66 opened a year ago by Eilermoon
  4

• USB Type C

  #55 opened 3 years ago by aethrys
  4

• PCB does not meet JLC PCB requirements - Break away tab is too small

  #54 opened 3 years ago by adecker
  3

• Buttons not working Pi Zero 2 w

  #64 opened 2 years ago by Drippydh
  0

• Would this power switch be ok to use

  #63 opened 2 years ago by X3NON4
  0

• 3.2 Inch 18Pin touchscreen

  #62 opened 3 years ago by BPouet
  1

• Scheme of PCB

  #61 opened 3 years ago by lgourmelon2
  0

• screen problem

  #58 opened 3 years ago by benoit198
  0

• Radxa Zero

  #57 opened 3 years ago by aethrys
  2

• Spi display with joystick

  #53 opened 4 years ago by bleau2000
  0

• PCB Printing

  #52 opened 4 years ago by Ayowyn
  2

• Getting kodi working.

  #51 opened 4 years ago by stanyertom
  2

• Compatibility with joystick

  #50 opened 4 years ago by bleau2000
  0

• cartridge header

  #49 opened 4 years ago by konsumer
  0

• Not issue but addition to guide if allowed: Safe shutdown Via brightness button

  #48 opened 4 years ago by stanyertom
  2

• Screen brightness problem

  #47 opened 4 years ago by mauriesvh
  10

• GBA SP power switches

  #46 opened 4 years ago by mousemat86
  5

• Can't find a power switch

  #37 opened 4 years ago by TheRealLorenz
  8

• Battery life?

  #21 opened 4 years ago by hpagseddy
  1

• Wrong charging module

  #23 opened 4 years ago by LoBelly26
  1

• ADS 1115/1015 install squematic

  #26 opened 4 years ago by Jonasbeavis
  2

• [Idea] Rpi CM3+ module

  #32 opened 4 years ago by bademux
  0

• Button problem...

  #33 opened 4 years ago by brueckspecht
  2

• Sound Issues

  #34 opened 4 years ago by Sinnohman
  3

• 3.5inch 54pin

  #38 opened 4 years ago by HFx6
  3

• PCB Printing

  #39 opened 4 years ago by CrimsonPrince
  2

• Is there possible to add a headphone output inside?

  #40 opened 4 years ago by MestreALMO
  2

• White screen - another time

  #44 opened 4 years ago by DroidHackTeam
  1

• Where is DC-DC StepUp converter?

  #45 opened 4 years ago by SozinovD
  2

• Screen Trouble

  #43 opened 4 years ago by Morpewpew
  5

• Possible to add battery indicators LED's link in orginal sp?

  #41 opened 4 years ago by Morpewpew
  1

• Screen Issue

  #36 opened 5 years ago by TheRealLorenz
  6

• not an issue, more a help request

  #35 opened 5 years ago by Frenzis78
  3

• white screen...

  #31 opened 5 years ago by brueckspecht
  6

• RPI wont boot

  #30 opened 5 years ago by brueckspecht
  2

• PCB dimension on JCLPCB

  #29 opened 5 years ago by Frenzis78
  2

• Noob question

  #28 opened 5 years ago by Frenzis78
  2

• Backlight flickering (when resistor is used)

  #25 opened 5 years ago
  2

• White Screen and Connection Help

  #24 opened 5 years ago by phillymadison
  2

• Kapton tape below the pi

  #22 opened 5 years ago by Jonasbeavis
  1