Very experimental! No compatibility guarantees!
Supported Ghidra versions:
- 11.2
- 11.1.2
- 11.1.1
- 11.1
- Sharp SM83 (CPU core used in Game Boy) support for Sleigh
- Game Boy ROM loader:
- Can load unbanked ROMs (<= 32kB, e.g. Tetris)
- Can load banked ROMs (> 32kB, e.g. Pokemon)
- Can load greyscale boot ROMs (DMG/DMG0/MGB/SGB/SGB2)
- Can load color boot ROMs (CGB/CGB0)
- Memory blocks based on the hardware memory map
- Banked regions use overlays (TODO: figure out if there's a better way to support them)
- GB vs GBC differences are handled (e.g. banked WRAM)
- Symbols for hardware registers (0xFFxx range)
- GB vs GBC differences are handled (e.g. existence of KEY1 register)
- Game Boy cartridge header data types
- Enumerated types for some things
- Download a prebuilt GhidraBoy release, or build it yourself.
- Start Ghidra
- File -> Install Extensions
- Press the plus icon ("Add extension")
- Choose the built or downloaded GhidraBoy zip file
- Restart Ghidra when prompted to load the extension properly
As a prerequisite, you need to have a Ghidra installation somewhere (an actual installation, not a copy of Ghidra source code!).
export GHIDRA_INSTALL_DIR=/path/to/ghidra
./gradlew
or
./gradlew -Pghidra.dir=/path/to/ghidra
You can then find a built extension .zip in the build/distributions directory.
- Decompiler output is difficult to read if certain instructions are used (e.g. rotates, JP HL for jumptables)
- Default "ASM calling convention" assumes all registers can be inputs and/or outputs. Inputs/outputs are often guessed incorrectly, so manual tuning is required for almost every function
- Are overlays the only / the best solution for handling banked memory areas? Right now in banked ROMs every function call to 0x4000-0x7fff needs to be manually resolved to the correct bank(s)
Licensed under the Apache License, Version 2.0.